Barn doors are an excellent way to close off a closet, essentially cutting the closet in half. Barn doors work great on narrow entrances, but can also be used on regular closet doors. You will only need a few materials to build barn door and they are easy to install. The result is simple clean layout and improved use of space.
Do you want to update the look of your bedroom but you’re on a tight budget? Do you want to find a new way of organizing and storing extra clothes? Barn doors for closets are an easy and cheap solution that can help with all these problems. Read this article to find out what adding barn doors can do for your bedroom, and for your closet space.
How to turn a closet door into a barn door
Making barn doors for your closet is a great way to add a touch of style and elegance to your space. Not only do they look great, but they also help you create the illusion of more space. Here are some tips on how to make double sliding barn doors for a closet, how to turn a closet door into a barn door, changing closet door to barn door and can you use barn doors for closets.
1. Get the measurements right
The first thing you need to do is get the measurements right. Determine how far apart the tracks will be on each side, as well as how tall you want your doors to slide open and shut. You can either measure the width of your doorway or simply lay out the track and mark where it will go (you may have to drill holes through drywall). Once that’s done, decide if you want your doors to stop at 90 degrees or go past that point. If so, add another 5-6″ beyond 90 degrees so that when you open one door fully it won’t hit against another one that is still partially open (this will ensure there are no accidents).
2. Install tracks on walls
Once you have decided where your tracks will go, install them by attaching them
How a to make double sliding barn doors for a closet?
Changing closet door to barn door.
Can you use barn doors for closets?
Here I am going to show you how I made my own barn doors for my closet. This was not an easy task but it was worth it. Now that I have them, I would never take them down. They add so much character to my house and make the room look so much bigger. If you are wondering if this is something you can do on your own, the answer is yes! This project does require some tools but nothing too complicated or hard to find at your local hardware store. You will need some woodworking skills but if you know your way around a saw and drill then you will be fine!
I always wanted to make my own barn doors for my closet but could never get started on it because there were so many different styles out there online and in stores that made it hard for me to decide what type of design I wanted to go with. Then one day it hit me – why not just use actual barn doors!? So that’s exactly what we did!
How to Make Double Sliding Barn Doors for a Closet
by Donna Montgomery
You can have the convenience of a sliding door without having to break the bank by making your own double sliding barn doors. This project is one of my favorites because it’s so simple and really turns out beautiful.
This tutorial will show you how to turn a regular closet door into an amazing statement piece in any room. The only thing you need is some basic carpentry skills, some time and patience. Once you’re done installing them, you’ll have space saving doors that open up rather than out, making it easier to access your closets without having to step over them or crawl under them!
You can make your own barn doors for a closet. The process is simple and you can use any wood that you like. This article will show you how to make double sliding barn doors for a closet, but there are many other types of barn door options available as well.
The first step is to measure your existing closet door size. Then measure the height of the closet door and subtract 1/4 inch from each measurement so that there is enough room for the hinges and latches on each side of the door frame itself. This will allow the door to slide easily without getting hung up at either end when opening or closing it.
Once you have these measurements on paper, cut two pieces of plywood that are the same length as your measured width of your closet door minus 1/4 inch on each side (for each piece) and two pieces that are the same height of your closet door minus 1/2 inch on each side (for each piece). These pieces should be approximately 2 inches wide by 4 inches high per side because they will form part of your base frame or threshold where you will attach all four sides together in order to create a flat surface upon which all other parts of your barn door will rest during assembly and installation in place. You can choose
If you have a space that needs a little extra storage, but you don’t have the space for a whole new room, consider creating a closet out of your garage or basement. If you are looking for ideas on how to make double barn doors for your closet, there are several different ways that you can do so.
Step 1 – Measure and Cut the Wood
Measure the height and width of your door and cut two pieces of wood that are approximately 2 inches longer than the height of the door. Cut them just short enough so that they can sit flush against the end of the wall and still overlap slightly on each side of your closet door. You will want to check this measurement before cutting so that you can adjust it if necessary.
Step 2 – Attach Your Door Hardware
Attach your hinges to one side of each piece of wood and screw them into place using screws or nails as needed. You should then place both pieces together with their hinges facing inward toward each other and attach them together using screws or nails through both pieces at once (this will keep them from moving around). Once all four holes have been drilled through both pieces of wood at once, place your hinge hardware back in
How do you make barn doors for a closet?
How to Make Double Sliding Barn Doors for a Closet
Barn doors are a popular design element for closets and other rooms in the home. They are usually made with wood, but can also be made from metal or other materials. This article will show you how to make double sliding barn doors for a closet using wood.
Step 1: Measure the Opening
Open your door and measure the opening (including trim). This will help you determine what width and height of door you need.
Step 2: Cut Your Wood
Purchase 1×4 boards that are at least 6 feet long (or longer if needed). Rip them down so that they are 3 inches wide by 8 feet long. These will be your stiles (this is what holds the panels in place). Rip each board into three equal-sized pieces, so that you have nine total pieces of 3×8 foot boards. These will be your rails (this is what slides between stiles). Cut these as needed so that each rail is at least 6 feet long.
You may want to sand all surfaces before assembly to remove splinters and rough edges from cutting.
Making a closet door into a barn door is an easy project. You’ll need a few tools and materials, but if you’re handy with woodworking or carpentry skills, this is an easy project that can add style and function to any room in your house.
If you have a long hallway or staircase, you can make double sliding barn doors for your closet. One of the best features about this type of door is that it gives you privacy while still allowing light to come through.
The first step in making double sliding barn doors for your closet is to measure the opening where you want to install them. Measure from top to bottom and side-to-side at each end of the opening so that you know what size boards and hardware you need to buy at your local hardware store.
Once you’ve purchased all of your supplies, cut down three lengths of wood equal in length but slightly narrower than your measurements taken earlier (1/8 inch less on each side). This will give you room for expansion when installing the hinges later on in the project.
Make your closet beautiful with these stylish barn doors!
1. Measure the opening of your closet. The width and height need to be measured in order to determine how many panels you will need. Each panel should be made from two 1×6 boards that are 6 feet long and 1 inch thick.
2. Cut out two pieces of wood for each side of the door using a circular saw or jig saw, so that it is as wide as your opening and tall enough to reach the top of the frame where you will attach them (see image). This will be your frame for each side of the door, so make sure it fits snugly inside the walls of your closet before moving on.
These are the steps to make your own double sliding barn doors for your closet:
1.Measure the width and height of your door, then add 1 inch to both measurements. This will be the size of the overall track that you’ll need to buy.
2.Once you’ve got your measurements, determine if they fall within the limits of what’s offered by any stores near you. If not, you can always buy online and have it delivered; just make sure that the company ships quickly and safely so that it arrives in one piece!
3.Once you’ve found a track that fits your measurements, cut it down to size using a jigsaw or other sawing tool (make sure that you wear safety goggles when doing this!).
4.Next, place two hinges on each side of the track with about an inch between them at the top edge of each hinge (this will allow them to move freely).
5.Now attach these hinges to each side of your doorframe with screws that match well with their color (this will ensure that they blend in with your door). You’ll want them placed about 4″ from either end so that they don’t interfere with each other when closing and opening again later on down
How to make barn doors for a closet
Barn doors are a popular design element in many homes. If you have a closet that needs some extra pizzazz, or if you want to add some privacy to your bedroom, you may want to consider installing barn door hardware. Here are some tips on how to make barn doors for your closet.
1. Measure your closet door
2. Purchase the necessary hardware and supplies
3. Install the hinges and tracks
4. Attach the hardware to the door frame