If you want to create an adjustable standing desk, you’re in the right place. I’ll show you how to build a standing desk that adjusts to your height with the push of a button, no matter how tall or short (or fat or thin) you are. The same goes for building a motorized version, if that’s what you’d prefer.
Have you ever wanted to try a standing desk, but thought they were too expensive, or took up too much space? I’ve got the solution for you! This Instructable, along with the help of a friend, will show you how to build your on standing desk using minimal tools. We use recycled material and other little things laying around. This stand can work as a simple adjustable stand (you can use a variable resistor), or as a motorized stand (you need to solder a few wires).
How to build a standing desk
The first step in building your own adjustable standing desk is to get some basic tools and materials. You’ll need:
A table saw or circular saw (or both), with a miter gauge and/or crosscut sled, depending on your design choice. If you don’t have either of these, you can use the Kreg Jig Pocket Hole System to make pocket holes instead.
A router with a flush-trim bit or dado blade for making dadoes and grooves. If you don’t have one, you can use the Kreg Jig Pocket Hole System to create dadoes instead.
These plans show how to build an adjustable standing desk using just a table saw and router, but if you don’t have those tools available, or if they’re too big or expensive for your needs, check out our list of affordable power tools that would work well for this project.
1.The height of the desk is adjustable.
2.The table top should be high enough to work comfortably with your keyboard and mouse.
3.Place the table on a level surface and fix it firmly in place so that it cannot move around when you sit at it or lean on it while working.
4.If you are using an old table, then make sure that all joints are solid and not loose or broken before fixing your desk top on top of them.
What you need:
A table or desk (a basic table from IKEA will work)
A friend to help with the heavy lifting
Some wood glue and nails (to secure your slats together)
Sandpaper or a sander (to smooth out any rough edges)
Optional: Paint, stain, or other finish materials
If you want to try out the standing desk lifestyle, here’s how to build your own.
The perfect height for a standing desk for most people is between 30 and 36 inches (75 cm – 91 cm). If you have a bad back, it’s probably better to go with the lower end of that range.
If you’re building a standing desk from scratch, be sure to use a good-quality wood that will hold up well over time. Plywood is generally not recommended because it tends to warp or split when nailed or screwed together. A solid-wood board like oak or maple works well.
If you’re using plywood anyway, make sure it’s covered in something like melamine before using it as the top of your desk. This will prevent scratches from sliding items (i.e., your keyboard) and make it look nicer overall.
I’ve been using standing desks for years, and I love them. The best thing about them is that they help me focus on what’s important — work.
Standing desks have been shown to improve health, increase productivity and reduce back pain. If you’re suffering from any of these problems in your current office setup, it may be time to make the switch.
But not all standing desks are created equal. Some are expensive, heavy and difficult to assemble. Others are cheaply made, break easily and aren’t adjustable.
In this guide, I’ll show you how to build a sturdy standing desk that can be adjusted to accommodate multiple heights as you grow taller or shorter over time.
The best standing desks are motorized because they make it easy to adjust your desk height.
This guide shows you how to build a motorized standing desk for about $100. I’ve been using my motorized standing desk for over 2 years now and love it.
In this guide, I’ll show you how to make an adjustable height desk that is sturdy, functional, and quiet enough to use at night without waking up your significant other.
The entire project takes less than two hours if you have basic tools and experience with woodworking. The most difficult part is cutting the slots in the plywood base that make it possible for the table top to move up and down smoothly.
You can make your own motorized standing desk for less than $50. With a little bit of wood and a few screws, you can create a great standing desk that will help you stay healthy and productive throughout the day.
The video below shows how you can build a motorized standing desk on top of an inexpensive Ikea Jerker desk:
This is the first step in building a motorized standing desk. The base is made of wood and steel, and it’s where all the electronics and motors are hidden. I designed this base to be as sturdy as possible to ensure that it can handle the weight of your future standing desk (which will be around 100 lbs).
The cross-hatch pattern on the top is meant to hide any wires or cables from view when you’re finished with your build.
I highly recommend using a Kreg Jig for all of your pocket holes during this project! It makes things so much easier! You can get one here: https://www.amazon.com/gp/product/B000WLKF5G
Standing desks have become increasingly popular in recent years. They are a great way to increase your activity levels and improve your health.
Standing is better than sitting for several reasons:
Standing burns calories, which helps you lose weight.
Standing improves circulation and reduces the risk of varicose veins.
Standing increases bone density, which helps prevent osteoporosis.
Standing increases alertness and reduces fatigue by forcing you to change positions more often.
Motorized standing desks make it easier to stand while working, but they can also make it harder to sit down while working! The following instructions will help you build a motorized standing desk that works for you.
The first step is to lay out all of the materials you’ll need. You can use lumber from a home improvement store, but it’s often cheaper to buy it from a local hardware store.
The second step is to cut all of the pieces that make up the frame of your standing desk. Make sure you have enough wood to make two similar frames, one for your standing desk and one for your sitting desk.
The third step is to secure the legs in place with screws or nails. These should be placed at least 6 inches apart so you have plenty of room to move around.
The fourth step is to place the top board on top of the legs and secure it in place with screws or nails as well. This will give you something sturdy on which to stand while working at your standing desk!