Pallet deck building is an old technique made of wood which had been used since the 1980’s. It’s not just useful for firewood, but like other old ways, pallets are being rediscovered as a useful and sustainable material for decking. Homeowners with a small budget or limited tool can enjoy the beauty of wooden pallet decking. The deck becomes one of the best places to gather with family and friends on weekends.
There are many methods to build a pallet deck around an above ground pool. The most common way is to attach the timber on top of the gate for extra stability,how to build a pallet deck for above ground pool easy pallet deck but in my opinion, this is done for appearance only. The second way is to build a timber frame and fill it with concrete. My dad used this method and it worked really well, the only problem was that it was time-consuming and heavy to move around while constructing an above ground pool.
How to build a pallet deck
Building a deck around your above ground pool is an easy and cost effective way to expand your backyard. The pallet deck is a great DIY project, but it’s not difficult to do yourself. The materials are inexpensive and you can build a pallet deck in a weekend.
Build the frame
Cut the 2x4s using a miter saw or circular saw (you’ll need five pieces for each side)
Attach the 2x4s together using 3-inch screws (the top of the frame should be 12 inches from the top of the pool). Make sure all corners are square before attaching them together.
Place one of the 2x4s on its side and attach it to one end of your frame by screwing through both pieces into one another. Then, turn it over and screw through both sides of that piece into its neighbor piece. Repeat this process until you’ve got four sides completed (two long ones and two short ones).
Pallet deck for above ground pool is a great way to add some extra space to your pool area. It can be used as a seating area or even as a lounge chair where you can relax and enjoy the sun without having to get in the water.
The pallet deck is very easy to make and it won’t cost you much money at all. The best part is that if you already have an above ground pool then this project will cost you nothing at all!
Pallets are free, so why not take advantage of them? They are great material for DIY projects because they are cheap and easy to find.
In this tutorial I will show you how to build a pallet deck for above ground pools using just two pallets.
How to Build a Pallet Deck for Above-Ground Pools
Whether you’re building a new pool or renovating an existing one, a pallet deck is an easy way to get comfortable and stylish seating. The best part? It’s free! All you need are some pallets and a few tools. Here’s how to make your own.
Step One: Collecting the Pallets
The first step is finding the pallets you want. If you don’t have any lying around, ask around at local businesses — they might be willing to donate them. Look for ones with smooth sides (no dents or splinters), that aren’t too old or damaged and that have no paint on them (this will make it easier to remove later). If you can’t find enough good ones locally, try searching online through sites like Craigslist or Freecycle.
Step Two: Preparing Your Pool Area
Put together all the tools you’ll need before starting work on your deck — tape measure, saws (to cut wood), hammer and nails (for attaching boards) and screwdrivers (for removing nails).
Step Three: Building Your Pallet Deck
How to build a pallet deck for an above ground pool. This is a great way to add more space to your pool area.
This post contains affiliate links. We may earn money from the products mentioned in this post, but this is at no cost to you, and helps bring you more creative projects. Thank you for supporting Smart Party Planning by using these links.
The project started with 4 wooden pallets that were purchased from Home Depot for $10 each (regular price). I used two full size and two half size pallets because I wanted the deck to be about 10 feet long (2×4’s were going to be too long). After disassembling the pallets, I cut 2×4’s down to size using my miter saw and then added on 2×6’s for support underneath (the 2×6’s are not pictured as they were already in place when I took these photos).
I used metal brackets to attach the 2×6’s and then screwed them into place using 3 inch screws (you can use anything that will hold weight). Then I added another layer of 2×6 boards just like I did with the first layer except this time there wasn’t a bracket underneath (it would have been too high if there was).
The project is very simple, if you have a pallet and some screws.
– screws (1/4″ for the wood and 3/8″ for the deck posts)