Concrete benches are everywhere. They’re a staple of city streets, park pathways, and in-ground pool decks. Concrete benches are often considered cast-offs—they don’t make the cut with homeowners who want stylish designer furniture for their yards and gardens.
What is the best outdoor concrete bench for a garden? We will see in details about designs, patterns and colors. You can choose diy or buy online.
How to build a concrete bench
This DIY concrete bench is great for entertaining on a patio or deck.
Build a concrete bench with this step-by-step tutorial. You’ll need a few materials and some basic skills to complete the project. The finished product will be a great addition to your patio or deck.
Materials
Step 1: Lay down the plywood boards and frame the sides of the bench with them. Make sure you have enough room for your legs to fit between each board. The more leg room, the better!
Step 2: Put down another layer of plywood boards on top of your first layer, but offset them so they don’t line up with the first layer’s joints exactly. This will give your bench more strength as well as make it look more natural when you stain it later on in this project!
Step 3: Use 4×4 posts to connect each side together at its corners by using lag bolts or screws (depending on what type of wood you’re using). You can use either 2x4s or 2x6s depending on how big you want your outdoor concrete bench to be (or how much weight it needs to support).
Diy outdoor concrete bench
The first time I built a concrete bench, I was pretty nervous. But it was so easy and turned out to be one of my favorite DIY projects ever!
This post contains affiliate links for your convenience. If you make a purchase through these links, I will earn a small commission at no extra cost to you. All opinions expressed are my own.
You can build a concrete bench in any size or shape you want. However, if you’re not comfortable with making your own molds or using concrete, this might not be the project for you. If that’s the case, I recommend looking into other DIY benches on the market (like this one).
Materials:
Concrete mix (you’ll need about 1/2 yard of concrete)
Sturdy 2x4s (enough to make up the legs)
Masonry screws (to attach legs)
The DIY concrete bench is a great way to add a rustic touch to your home or garden. Concrete benches can be made from various materials such as cement, sand, and stone. In this article, we will show you how to build a DIY concrete bench using the most common ingredients.
We have also prepared for you 7 different designs of the concrete bench so that you can choose the right one for your garden.
Concrete mix (2 parts sand + 1 part cement)
Water (1 part water)
Cement dye or colorant (optional)
Trowel
If you want to build a concrete bench, it’s important to choose the right materials. Concrete is a durable material that can withstand the elements, but it needs a little extra care during installation. In this tutorial, I’ll show you how to build a concrete bench with your own hands.
A concrete bench can be used in any garden or backyard, whether it’s for seating or for storage. It makes a great addition to any outdoor space, so read on for everything you need to know about building your own concrete bench.
How to Build a Concrete Bench
Building a concrete bench is a fairly simple project that can be completed in a few hours. Concrete is strong, durable and requires little maintenance. It is also easy to work with as long as you follow the right steps.
Materials needed:
• Concrete mix (bagged) available at any hardware store
• Concrete trowel (or regular trowel)
• Leveling tool or straight edge ruler
• Rubber mallet (optional)
The design of this diy concrete bench with back is inspired by the traditional wooden benches of the Italian Piazzas. Using concrete and wood, it gives a simple and elegant look to any outdoor space. This is a great project for those who want to make their own outdoor furniture at home.
This bench can be built using wood, steel or concrete posts and beams. Here we will show you how to build one using concrete posts and beams for this diy concrete bench with back.
The first step in building this diy outdoor concrete bench is to dig the post holes and pour the footing, which should be at least four inches thick. For added strength, it is recommended that you add rebar into the footing before pouring it in place.
You can also use pre-cast concrete footings instead of digging your own holes if you prefer a more professional look. These come in different sizes so make sure to measure your area where you plan on placing them before ordering them online or at your local hardware store.
Next, set your 4x4x8 footings into place according to where they will be positioned in relation to each other (you can use stakes and string lines) then level each one with a carpenter’s level before pouring
DIY Outdoor Concrete Bench
I have had this old bench for years and it was in bad shape. It is made of concrete and has a wrought iron base. I thought it would be a great project to redo.
This is the before picture, it was beat up and dirty.
The first step was to remove all the old paint with a wire brush, then I used a power sander to get rid of any rough edges.
The next step was to give it a good cleaning and seal the entire bench with some kind of sealer/paint that would protect the outside from water damage and UV rays.
After letting it dry for about 24 hours, I started applying some plain concrete stucco mix (you can find this at any home improvement store) to create the look I wanted on top of the bench. This step took several coats until I got it looking how I wanted it. I also added some extra concrete into my mixes so that my bench didn’t look too flat or boring
The DIY concrete bench project is a perfect weekend project for the DIY-er. It’s also a great solution for those who want to add some outdoor seating to their yard or patio, but don’t want to spend big bucks on new furniture. If you have the right tools and materials, this project should take you about two hours.
The first thing you need to do is decide on your design. You can make your bench any size or shape that fits your needs and space. We chose this square design because it’s easy to build, looks good from all angles and will fit into tight spaces.
To get started, use a level and pencil to mark out where each layer of concrete will go. Make sure that each layer is straight and level so that the top layer will be flush with the bottom layer once they are all connected together.
Now it’s time to mix up your concrete! You can buy ready-mix concrete at most hardware stores, but we like using our own homemade mixture made from 1 part sand and 2 parts gravel (or pea gravel). Just mix these ingredients together thoroughly in a large bucket or wheelbarrow with water until they are completely dissolved into each other — don
Concrete benches are a great addition to any garden. They’re inexpensive, easy to make, and they can be built in an afternoon or two. You can also make a concrete bench with back if you want extra sitting space.
Concrete is an excellent choice for outdoor furniture because it’s durable and low-maintenance. It doesn’t need to be painted or stained and it’s extremely hardwearing, so it will last for many years without needing any attention at all.
The main disadvantage of concrete is that it’s heavy, which is why this project requires some planning and careful construction. Concrete needs to cure before it can be walked on, so you’ll need to build the bench off-site and move it into place once it has dried out completely (see below).
Concrete benches are a great addition to any backyard or patio. They are very durable and will last for years. They can also be used indoors if you have a garage or basement that needs some extra seating.
Concrete benches can be expensive to buy so why not make your own? It’s not as hard as you think. This article will show you how to build a concrete bench with an attached backrest.
Things You’ll Need:
* Concrete Mix (1 part cement, 3 parts sand and 4 parts gravel)
* Plastic Tub or Bucket
* Shovels for mixing concrete and moving dirt/gravel around
* Tape Measure
* Sharpie Marker
* Hammer/Nail Set (not shown in picture)