As many of you have heard by know 383 stroker engines are being pushed to the forefront of late model performance thanks to the combination of affordable (relatively) high quality aftermarket pieces and readily available crate motors.
2015 It cost about $1500 to build this 383 Stroker engine for this Flathead Ford. While it may seem like a lot of money, you will spend more on the parts for a 454 Stroker kit and still have less HP and probably less reliability. Plus, it’s really fun to tinker with the Flathead Ford!
How much does it cost to build a 383 stroker
The answer to this question depends on the type of engine you want to build. A 383 stroker kit contains all the parts necessary to build a 383, but it doesn’t include the machine work and assembly required. This is why they are sold at a discount.
The price of a 383 stroker kit varies depending on the parts included in the kit. The average cost is between $3,000 and $4,500 for most kits. If you want higher quality parts, then expect to pay more money for your kit.
To turn your 350 into a 383 stroker, you’ll need some machine work done first at an auto repair shop near you. This includes boring out your block as well as other machining operations that may be needed depending on what type of block you have (i.e., cast iron vs aluminum). The cost of this operation ranges from $1,200 to $2,000 depending on where you go and how much work needs to be done.
Once the machine work has been completed at an auto repair shop near you, then all that’s left is putting together your engine with all its new parts in place (i.e., pistons, rods and bearings). For this operation, expect to spend another $1
The cost of a 383 stroker kit depends on the brand you choose.
The average cost of a 383 stroker is $1,500 to $2,000.
383 Stroker Kit:
A 383 stroker kit is used to modify a small block Chevy engine and make it more powerful than its factory specs. The kit can be purchased at most auto parts stores or online for about $1,500 to $2,000. Installation is fairly easy and can be performed by an experienced mechanic with basic tools in less than two hours.
Turning a 350 into a 383 Stroker:
If you already have a 350 engine, adding the parts from a 383 stroker kit will turn it into a 383 stroker engine without having to buy another motor. It takes approximately five hours to install all of the parts needed for this modification if you have some mechanical experience and know how to use basic tools like wrenches and ratchets.
The 383 stroker is a very popular engine, and for good reason. It has a lot of power potential, runs well on pump gas, and is relatively affordable. The only downside is that it can be quite costly to build one from scratch.
Whether you’re looking at building a 383 stroker or just want to get some more power out of your current engine,
Here are some important facts about the 383 stroker kit:
383 Stroker Kit Price
The average cost of a 383 stroker kit ranges from $1,800-$4,000 depending on how much work you want done. If you already have an engine block or heads laying around, then expect to pay less than $1,800 for the rest of the parts. On the other hand, if you don’t have any parts to start with then expect to pay closer to $4,000 for everything else.
383 stroker kits are very popular. People love the look of a big block Chevy engine with a high-performance camshaft and stainless steel headers. But the cost of building a 383 stroker can be expensive.
The most common parts for building a 383 stroker include:
A complete short block (a 350 block bored .030 over). This is where you start. The short block includes all internal components; pistons, connecting rods, crankshaft and bearings. The short block also includes an oil pump and timing cover/oil pan assembly. If you already have an engine in good condition, this may be all you need to get started on your project.
A hydraulic roller camshaft for better valve control and horsepower at higher RPMs (3000+). Camshafts can range from mild to wild depending on what type of driving you plan on doing with your car or truck
Forged connecting rods that are heat treated for maximum strength at high RPMs
Forged aluminum pistons with valve reliefs machined into them to help cool the piston during combustion
Stainless steel 1-piece exhaust headers that fit tightly around the cylinder heads without clearance issues
How much does it cost to turn a 350 into a 383 stroker?
The cost of turning your 350 into a 383 stroker depends on the engine kit you choose. The average cost of a 383 stroker kit ranges from $800 to $10,000, depending on its power output and components. The more expensive kits usually have H-beam connecting rods and forged pistons with higher compression ratios. They also include stronger crankshafts and connecting rod bearings as well as better cylinder heads and intake manifolds.
What is the best way to build an LS1 engine?
The best way to build an LS1 engine depends on what kind of performance you’re looking for. If you want maximum torque at low rpm, then you might want to consider using a camshaft with more lift and duration but less overlap. This will allow the valvetrain to remain stable at low rpm so there won’t be any issues with valve float or valvetrain instability due to high temperatures generated by forced induction setups like superchargers or turbochargers. On the other hand, if you want maximum horsepower at high rpm (4000+), then you might want to consider using a camshaft with less lift but more overlap so that maximum torque isn’t reached until
The 383 stroker kit is a cheap way to get more power out of your 350 Chevy engine. This kit includes everything you need to turn your 350 into a 383 stroker. The kit includes pistons, rings and bearings, camshaft, timing chain, crankshaft and connecting rods.
If you want more power than just a 383 stroker, we have other kits that will allow you to build 572, 632 and even 792 horsepower engines.
The cost of turning your 350 into a 383 stroker will depend on where you buy the parts from and how much work you want to do yourself. We recommend buying all the components from us because we offer free shipping and great customer service.
If you want an easy installation process for this project, we also offer complete engines with block machining done for an extra fee if needed.
The cost of turning a 350 into a 383 stroker varies depending on what you buy, where you buy it and how much work you want to do yourself. The most expensive part of the process is the crankshaft. We haven’t found any companies that sell them for less than $800. You can find used ones on eBay and other sites, but be careful because some are worn out and need replacing anyway.
The next most expensive part is the camshaft. You can purchase one from Summit Racing for $454 with free shipping (link at bottom). That’s not too bad considering that Summit sells everything else needed to do this conversion as well (head gaskets, pistons, timing chain kit). If you’re looking for something cheaper than Summit then check out Parts America or Jegs (links at bottom). They both carry these parts at discounted prices.
If you’re planning on doing this conversion yourself then there are many tools needed for this project. Most notably is an engine stand or jig and torque wrench (link at bottom). We recommend buying both from Speedway Motorsports since they’re affordable and come with free shipping
The 383 Stroker Kit consists of:
– billet steel crankshaft with forged steel connecting rods, 4340 forged aluminum pistons, and anodized aluminum cylinder heads.
– To turn your 350 into a 383 stroker, this kit is all you need. The components are built on CNC machines and assembled by hand using the highest quality materials available. All parts are 100% tested prior to shipping to ensure your satisfaction.
Whether you’re looking for the best 383 stroker kit or a complete 383 stroker engine build, we can help. Our award-winning built engines are designed to exceed your expectations and include everything you need for a high horsepower build.
We offer:
Complete turnkey engines
383 stroker kit parts and components
Performance parts for your muscle car or truck
Engine dyno testing
383 stroker crate engines
383 stroker kits, parts & components.