When it comes to building a porch, there are many options to choose from. One of the most popular is the screened in porch. These porches provide a great source of ventilation while allowing you to enjoy the outdoors. They come in a range of sizes and styles, making it possible to find exactly what you’re looking for. Screened porches can be built on top of your existing deck or on concrete too. For this guide, we’ll walk you through how to build a screened in patio on concrete yourself and save some money while doing so.
Building a screened-in porch on an existing deck can save a lot of time and money. A screened-in porch will come in handy when you decide to entertain guests outdoors since it provides extra room on your deck to mingle and enjoy the fresh air. By building a screened-in porch on an existing deck, you can utilize your existing deck surface or patio instead of buying expensive wood planks and materials.
How to build a screened in patio
A screened in porch is a great way to expand your living space and add value to your home. You can build a screened in porch on concrete, but it is more common to build the screen around an existing deck. This article will focus on building a screened in porch on an existing deck.
Step 1: Lay Out the Screening
Measure the area you want to cover with screening and mark its perimeter with stakes. The length of your screening should be equal to or longer than the length of your deck plus 6 feet. The width of your screening should equal half of the width of your deck plus 6 feet (for example, if you have a 12-foot-wide deck, then your screen should be 18 feet wide).
Set up posts at each corner using treated 4x4s or metal posts for strength and durability. Set them into concrete footings if possible or use concrete blocks as supports under each post until they are set into place permanently by pouring concrete into them from above (see Step 2).
Install metal wire mesh fencing over these posts so that it covers the length of your perimeter stakes and extends out past them slightly so that it can be attached to them later (see Step 3).
If you’re building a screened-in porch on concrete, start by leveling and smoothing the ground.
If you’re building a screened-in porch on an existing deck, you’ll need to install posts that are slightly taller than the height of the existing railing. Cut 2x4s to fit between these posts and nail them together with two nails at each end. Then secure them to the post with three additional nails on each side.
Next, set up a level line from one end of your deck to the other. Measure from this line across to determine how far apart to place your support posts. Use this measurement as a guide when installing your 4x4s. Mark where they should go using stakes and string lines that run along both sides of your deck.
Once all posts are installed, attach two 2x4s horizontally across each post for framing (be sure they are level). Next, add a second 2×4 vertically between each horizontal member and nail both in place securely with four nails per side (some people use screws here instead of nails). Nail or screw another 2×4 vertically between each horizontal member so that it sits atop the first vertical board and is flush with its outer edge (this will be
Building a screened-in porch is a great way to extend your living space outdoors. You can enjoy the fresh air and sunshine without insects, pollen and other irritants getting in the way. And you can do it on a budget — it’s not necessary to hire a contractor to build your porch.
Building a Screened-In Porch on Concrete
If you have concrete patio blocks, the easiest way to build your screened-in porch is by building it right on top of them. Before you start construction, remove any weeds or grass growing between the blocks and fill any gaps with sand or soil. Then lay out some plastic sheeting to keep the concrete from getting wet while you’re working on it.
To frame your porch, use 2x4s and attach them together at right angles with deck screws. Make sure they are level before screwing them together so they don’t end up crooked after the project is complete. Once you have enough support for your roof structure, set them in place and secure them with more deck screws through each 2×4 into each block below it.
Building Your Own Screened-In Porch for Less Than $100!
If you want to add a screened-in porch to your home, you have many options. This article will help you decide what type of screened-in porch is right for you and how to build it.
Building a Screened-In Porch on an Existing Deck
If you already have an existing deck, adding a screened-in porch may be easier than building one from scratch. The first step is to make sure the deck is sturdy enough to support extra weight and doesn’t sag in any areas. A professional builder can check this out for you at little or no cost.
Next, decide how large you want your screened-in patio area to be. If there is room on your existing deck, you can build it as large as possible without extending beyond the edges of the deck’s footprint. You can also add lattice around the back and sides of your new porch if you want more privacy or shade in warmer months.
If there isn’t enough room on your existing deck, consider adding another level onto your house or adding another floor underneath the existing one (called “duplexing”). You might not need all that extra space now but by building up instead of out, it will be easier to expand later on without having
How to Build a Screened-in Porch on Concrete Steps
Building a screened-in porch can be a great addition to any home. It provides a place for entertaining or just relaxing, whether it’s during the day or night. To build this project yourself, you will need to consider several factors.
1. Determine how big you want the porch to be.
2. Decide what materials you are going to use for your screen and frame.
3. Prepare your concrete slab if needed.
4. Lay out the frame and secure it with screws or nails as needed to keep everything together when you start building on top of it later on in the process.
Building a screened in porch on concrete can be a good way to add more usable space without having to tear up your existing deck.
Building a screened in porch on concrete:
1. Dig the holes for the posts and fill them with concrete.
2. Set the posts into place and use wood stakes to hold them upright until the concrete dries. (If you have any doubts about your ability to get this right, consider hiring a contractor).
3. Cut the plywood panels to fit between each post and screw them onto the side of the posts closest to the house. Attach the outer edge of each panel with screws or nails driven through pilot holes drilled in from the other side so they don’t split out under pressure.
4. Use pieces of 1-by lumber as spacers between each panel and attach them with screws or nails driven through pilot holes drilled in from the other side so they don’t split out under pressure.”
Step 1
Measure the length and width of the deck to determine how much lumber you will need. You will need enough 2x6s to make the frame, as well as enough 2x10s for the roof rafters. If you have enough room for an overhang, consider adding one to your deck design. This will allow you to keep the rain out of your screened in porch.
Step 2
Cut all of your 2x6s and 2x10s down to size with a circular saw or a reciprocating saw. Make sure that these cuts are straight and square so that everything fits together correctly when you begin building your screened in porch on existing deck.
Step 3
Nail together two sets of four 2x6s with 16d nails or screws, making sure that all corners are square and straight. These two sets of posts will make up the side walls of your porch structure. Use metal braces between each pair of posts if necessary to keep them from leaning outward too far or inward too far due to wind pressure on the structure’s roof during storms or high winds (the metal braces should be secured into place with screws).
When it comes to building a screened in porch on existing deck, the first thing you need to do is make sure that your deck has been constructed properly. A screened in porch should not be built on a deck that has been built with weak or flimsy materials or one that was not built with proper support structures.
If your existing deck has been properly constructed then you are ready to begin building your screened in porch. The first step is to build a support structure for the screen and then build the frame of the screen itself. Once this is done you will need to attach the screens and finally cover them with aluminum so they can keep out the bugs but allow air flow through the mesh of the screen.
Building a screened-in porch on an existing deck is a great way to add outdoor living space without the cost and hassle of building a new deck. Screened-in porches can be added to decks of all sizes, but there are some considerations to keep in mind when choosing materials for the project.
Screened-in Porches on Existing Decks
Screened-in porches are popular additions to existing decks because they don’t require tearing out the existing deck or adding another level of support, which can be expensive. Adding a screened-in porch involves installing a solid wall around the perimeter of the deck and installing screening material behind it. This design makes it easy to open up the screened area during warm months and close it off with canvas when cold weather arrives.
The easiest way to build a screened in porch on an existing deck is to simply build the frame and attach it to the main structure. This can be done by building a frame with 2x4s, attaching it to the house and then attaching screening along the bottom.
If you have an existing deck that you would like to enclose, here are some tips:
1) Measure your existing deck. Add 1 foot to each dimension of your deck so that you can build a frame that will fit perfectly around your deck. Then add another 3 feet for overlap onto the rest of your yard if needed.
2) Decide if you want a permanent screen room or if you want removable panels so that you can use it as an open area during nice weather. If you choose removable panels, purchase inexpensive vinyl paneling at any hardware store (usually $5 per square foot). Cut this into pieces that will fit into whatever size frame you are building.
3) Build your frame using 2x4s or 2x6s and attach it to either side of your house or garage (make sure it doesn’t touch any electrical wires!). Attach screening along the bottom edge using staples or small nails (depending on type of screening used).