If you’re looking for a professional contractor, we’re not just ‘mezzanine builders -we are also contractors to whom you can safely entrust the construction of your mezzanines and storage systems. Our mission is to provide our customers with garage storage, garage cabinets and mezzanine systems that meet the highest standards of quality, innovation, and service.
How to build a garage mezzanine is a guide that will take you from start to finish (drum roll, please). This guide will teach you how to plan, design and build a garage mezzanine. ALSO how to build a mezzanine loft, how to build a loft platform.
How to build a garage mezzanine
Garages are a great place to build a mezzanine loft, but it’s important to plan ahead and get the right permits before you begin building. You’ll also need to know how to build a garage mezzanine so that it’s safe and secure.
Planning Your Mezzanine Loft
When planning your garage mezzanine loft, you need to decide what kind of structure will be best for your needs. There are three different types of structures:
A simple platform built out over the garage door opening that provides little or no storage space. A platform like this can be built using 2x4s or 2x6s with plywood flooring and wood siding.
A loft with a ladder leading up from the ground floor so that it can be accessed from both sides of the garage door opening. This type of loft is often used as an additional sleeping area for overnight guests in guesthouses or cabins where there isn’t enough room for separate bedrooms on each floor level. They can also provide additional storage space underneath them if they aren’t too high off the ground (usually around 6 feet tall). They come in all shapes
If you’re building a mezzanine loft, there are many things to consider. The main thing to keep in mind is safety. A mezzanine loft can be a dangerous space if it’s not built properly. If you don’t have the right plan or ideas for building a mezzanine loft, it’s best to hire a professional contractor.
The first step in building a garage mezzanine is to decide how high you want your loft to be. If you’re using the space as an office, then you may want it lower than if you were using it as a guest room or playroom for children. The next step is to find out what kind of flooring material will work best for your needs and budget. You can choose between carpeting and hardwood floors and even laminate flooring if that’s what works best for you and your family.
Once you’ve determined how high and wide your new loft will be, it’s time to start building! When constructing your new loft, make sure that all walls are sturdy enough to support the weight of whatever materials are stored up there along with people walking around on them regularly over time.
A mezzanine loft is an excellent way to add living space to your home. It can be used as an office, craft room, library or even a bedroom. There are many different ways to build a mezzanine loft, but this article will focus on building an open-air structure with no walls.
Materials needed:
1×6 and 2×6 lumber
2x4s for posts and rafters
L-shaped brackets (or other brackets of your choice)
Roofing materials (plywood or OSB sheets)
Sheetrock or other wall covering material
If you’re looking to add more space to your home, building a loft is one of the best ways to do it.
Here are some tips to help you build a loft:
1. Choose the right materials
If you’re going to be working on this project yourself, you’ll need to choose your materials carefully. For example, if you’re building a loft in your garage, choose wood that’s durable and easy to work with. Wood should have a good finish so it won’t splinter or crack when exposed to moisture. You can also use metal studs if they’re available in your area because they are strong and resistant against fire and other hazards.
2. Mark out the layout of your mezzanine
Before you start construction on your new loft, make sure you know where everything needs to go first. Use chalk lines or other tools to mark out where each piece will go so nothing gets mixed up during assembly later on down the road. This will save you from having any problems installing each piece into place once all of them are finished being built!
3. Lay down plywood flooring or use boards for support*
Once your framing is complete for your new loft project, lay down some plywood before
A mezzanine is a platform that extends from the floor to the ceiling of a room, and it can be built into your garage to provide extra storage space. A mezzanine is also known as a loft because it looks like an upper story or second floor. The term “loft” comes from the British word for loft, which means storage area.
Mezzanines are often used in industrial and commercial buildings where there is no second story to build upon. They’re also commonly used in residential buildings as well, either in garages or other rooms of the house.
How to Build a Mezzanine Loft
A mezzanine loft is a platform that is built above the main floor of a room and is accessed by stairs or ladder. The space can be used for storage, sleeping or even as an office area.
Steps to Build a Mezzanine Loft:
1. Build the frame. Use 2x4s for the frame and make sure that each side is square before you continue building.
2. Install the floor joists. The joists should be spaced 16 inches apart from one another and attached to the sides of the frame with 3-inch screws every 6 inches along the length of each joist. Check for squareness after attaching all of them in place.
3. Install the plywood subflooring on top of your joists and attach it into place using 3-inch screws at 6-inch intervals along each piece of plywood until you have covered all of your joists with plywood sheeting down onto them evenly across their entire length. Make sure that there are no gaps anywhere between any pieces of plywood when you are done attaching them together into place over your entire surface area so that they will remain supported effectively when weight is placed onto them later on down
How to Build a Mezzanine Loft
A mezzanine loft is a great way to add space to your home. It’s an inexpensive way to get more square footage, and it can be built in just a few days. For example, if you have an unfinished basement, building a mezzanine loft above it gives you more space while still leaving the area below available for storage.
Mezzanine lofts come in many different styles. You can build one that looks like a balcony or one that mimics an attic space. They’re usually made from wood but also can be built from other materials such as concrete blocks or steel beams. Here’s how to build one:
Planning Your Mezzanine Loft
Plan out what size you want your mezzanine loft to be and where it will be located. The size of your mezzanine loft depends on how much space is available and what type of building materials you have available for construction. You also need to decide where the entrance will be located on your new room so that you can properly assess ventilation issues in your home and make adjustments accordingly during construction.
Building Your Mezzanine Loft
A loft platform is a great way to add extra space to your home. It’s also a great way to add value to your property.
Loft platforms are a perfect solution for creating an extra bedroom, home office or studio space. They’re also ideal for creating an additional bathroom in areas where space is limited.
The best part about building your own loft platform is that it’s relatively simple and inexpensive!
Loft Platform Planner:
Materials List:
Mezzanine loft beds are a great way to create a second sleeping area in your home. They can be used as an office, playroom or guest bedroom and are perfect for small spaces.
Mezzanine loft beds are installed on top of the existing floor joists, which makes them easy to install and relatively inexpensive.
Step 1: Install the Frame
Build the frame from 2x4s. The frame should be made of pressure-treated lumber so it will last longer outdoors. Use 3/4″ plywood for the flooring (3/4″ is standard for most mezzanines). Nail or screw the pieces together into a rectangle shape with a 1-1/2″ gap between each board, leaving an opening at one end so you can reach in and install your bed slats later on. Add cross braces to strengthen the structure and support any additional weight that may be placed on top of it (like trunks or chairs). Cut a piece of plywood to fit over the open end of your platform frame, then secure it in place by nailing through into each side of your structure. If you plan on using this space as an indoor play area for kids, add an additional layer of plywood over the existing
I built this loft bed for my son and daughter. It was a fun project to do with them.
You can see the bed in action here:
My kids love their new loft bed!
The finished product looks just like this:
Step 1: Make the frame of the bed. I used 2x4s as the legs and 2x6s as cross beams. You will also need plywood for the flooring, and a sheet of 3/4″ MDF for the top of the platform. All lumber was purchased from Home Depot or Lowes.
Step 2: Install your supports for your mattress (i.e., slats). This step is optional if you don’t want to put in slats. However, it does help with support of your mattress, especially if you have a heavy person sleeping on it (like me!).
Step 3: Install your mattress support system to each support beam using lag bolts or screws. I used lag bolts because they are stronger and more secure than screws would be in this application.