Blogger said that this was a great project for me because I am always looking for useful ways to re-use scrap wood. Indeed, I am very resourceful. I have a small workshop in my garage and I can build anything from a table to a birdhouse. In fact, if you want a birdhouse I’m your man (I’ll even throw in the nails and hammer).
How to build a fold down table
Fold-down tables are a great way to maximize space in your kitchen or laundry room. They are also a great option for temporary work surfaces in the garage or workshop.
It’s a simple project that can be completed in just a few hours. In this article, I will show you how to make fold down table legs with only two tools: a drill and screwdriver.
If you’re looking for a way to add additional workspace in your home, this DIY fold-down table is perfect. It’s easy to make and is great if you have limited space.
This table can be used in a multitude of ways, such as a laundry table, work table or even a place to keep your laptop while watching TV. The best part about building this project is that it’s inexpensive and simple to do.
Materials:
2 1/2″ x 3″ x 4′ boards (for the legs), cut into two pieces each (4 pieces total)
1 1/2″ x 2 1/2″ x 4′ boards (for the tabletop), cut into two pieces each (4 pieces total)
Eighteen inches of 1 1/4″ screws*
Sixteen inches of 1 5/8″ screws*
How to Make a Fold-Down Table
A fold-down table is a great way to add extra workspace for projects. Whether you’re working on a car or doing some sewing, you can use the table as an extra workbench. You can build this table yourself in just a few hours using basic tools and materials.
What You’ll Need:
Flat plywood board (1/4″ thick) – 2′ x 4′
4×4 post – 10″ long, cut into two pieces at desired height (8″ or 9″)
2×4 lumber – 1 piece 12″ long; 2 pieces 18″ long; 2 pieces 24″ long; 1 piece 36″ long; 1 piece 48″ long; 1 piece 60″ long
Wood glue (optional)
How to Build a Fold-Down Table
Building a fold-down table is a great way to save space in the garage, workshop or office. The construction is fairly simple and can be done with basic carpentry tools, like a circular saw and drill. You’ll also need some basic woodworking skills and knowledge of how to use them. If you’re unfamiliar with these tools or techniques, check out our complete guide to basic carpentry before starting this project.
Materials and Tools Needed:
1 sheet of 3/4 inch plywood (cut into two 24×48 inch boards)
4 feet of 2 x 4s cut into two 48 inch pieces and two 36 inch pieces (these will be used for the legs)
2x4s cut into two 14 inch pieces and one 12 inch piece (these will be used for the braces)
The table top is made from plywood and it has a thin layer of foam on the top to give it a bit of cushion. I have also added some storage space underneath.
The legs are made from wood with a metal bracket that holds them together. The legs fold away for easy storage, but they are strong enough to support the weight of the table when it is open.
This table can be used as a workbench, laundry table or even as a desk. It folds down flat making it easy to store when you don’t need it.
How to Build a Fold-Down Work Table
This is one of those projects that looks more complex than it really is, but if you know your way around basic woodworking and have the tools and materials on hand, it won’t take long before you’re enjoying the fruits of your labor.
Laundry folding tables are great for any laundry room or utility room. They can also be used as extra work surface in the garage, basement or kitchen.
To start with, you need to choose which size table you want. There are many different sizes available; however, we recommend getting one that’s at least 36 inches wide so that it will fit most washers and dryers on the market today. If you want additional space for folding clothes and sorting through piles of clothes then go for 48 inches wide instead.
Next, decide how tall you want your folding table to be when it’s folded down flat against the wall. You’ll probably want it around 30 inches high when folded down; however there are some other options available as well including 38 inches high and 42 inches high if needed. You can always change this height later on once you’ve built your table if needed too so don’t worry
How to build a fold down work table,
I’ve always wanted a fold down table, but they are expensive, and I didn’t want to spend that much money. So I decided to make my own. It’s really easy! You just need some plywood and some hinges. Then you screw the plywood together, cut it into two parts, and add the hinges.
I used 2x4s for the legs because they are cheap and easy to work with. You can use 2x6s if you have them available. If you don’t have any 2x4s lying around, you can get them from home depot or lowes for about $1 each (or less). The plywood was about $20 for 4′ x 8′.
I started by cutting the wood into two equal sized pieces with a circular saw or miter saw (or jigsaw). Then I laid out where I wanted my hinges and drilled holes in each piece so that when they were put together they were aligned perfectly with each other. After drilling holes in both pieces of wood, I screwed them together using 1 1/2″ screws through the bottom piece of wood into
How to Build a Fold-Down Work Table
A fold-down work table is a great way to make use of otherwise wasted space. By simply folding it down when it’s not in use, you can create extra room for other activities in your garage or workshop. The table can be used for various projects, including woodworking and sewing.
In this article, we will show you how to build your own fold-down work table from scratch. Once it is finished, you will have a sturdy and durable piece of furniture that can be used for years to come!
Materials:
4 x 4 lumber (for legs)
1 x 6 lumber (for tabletop)
2 x 4 lumber (for crosspieces)
How to build a fold down work table,
The following is an excerpt from my book, The Art of Workbenches. If you have a woodworking bench that you use in your shop, then you can probably make this type of work table in your garage. This is a great work bench for the home because it folds up when not in use and can be used to hold larger tools as well as smaller ones.
All you need are some 2x4s and plywood, along with a few other materials.
How To Make A Fold Down Table
Materials:
Two 4×8 sheets of 3/4″ plywood (or two 4×4 sheets of 3/4″ plywood)
Six 2″ x 4″ x 8′ boards (for top)**
This is a simple woodworking project that will allow you to build a fold down work table. The work bench is made from 2x4s and can be complete in about an hour. It’s the perfect solution for small spaces where you need extra seating or a place to eat meals.
The following materials are needed:
2x4s
Wood glue
Nails or screws