Building a deck without ground is not easy, and it can be very dangerous. The first thing to consider would be the stability of the ground supporting your deck. Is there enough ground around it? If you are planning to build your deck on uneven ground like on a hill, you need to pile up extra four inch thick cement blocks so that the pressure of a person’s weight doesn’t cause the uneven ground to give way underneath them as they stand on it. But of course, we just want to build a floating deck, that needs no extra support at all. A floating deck on uneven ground will never work unless you use gunite or sprayed concrete on top of flat cement blocks. But this will cost you thousands of dollars more than if you are just building it on level ground.
Building a deck is an excellent home improvement project to expand your living space in a stylish way while providing additional outdoor area. There are several different types of decks you can create with the most popular being wooden decks which have the right combination of style and durability.
How to build a deck on ground
If you have a sloping or uneven area in your backyard, you can still build a deck by using a floating deck. A floating deck is built so that the base of the decking boards are suspended over an area of grass or other surface material. The beauty of this type of deck is that it requires no digging or concrete footings.
Building a floating deck over grass.
Step 1 – Measure and mark the area where you want to build your floating deck. You will be working with two baseboards and lining them up with each other to create a straight line across your yard. One board will be placed on top of the other, creating an offset pattern that makes it look like one board when viewed from above.
Step 2 – Set up two baseboards on both sides of your yard where you want them to be placed permanently along the edge of your property line or fence line if it’s already there (if not, consider building one). If there isn’t any natural barrier or existing structure near your house where you want to build your floating deck, consider putting up fencing around the area first before installing your baseboards so that they don’t get damaged by lawn equipment or debris blowing around during construction work on your
If you’re building a deck on ground that’s not level, you can build a floating deck to make the surface level. A floating deck is built on short piers or posts that rest on top of the uneven ground. The decking boards sit on top of these posts, creating a level surface.
If you have an uphill section of ground, you’ll need to build some kind of retaining wall so that water doesn’t run off into the house during rainstorms.
Building a floating deck over grass is similar in concept to building a floating deck over uneven ground, but the process is slightly different. In this case, instead of placing piers into the ground, you use metal posts with metal brackets attached to them. You then attach your decking boards to these metal brackets using screws or nails. You’ll also need to put down some sort of gravel or stone on top of the grass so that it doesn’t grow up through where you’ve put your posts and brackets.
If you’re building a deck on ground that is not level, it’s best to build a floating deck. Floating decks are built on top of the ground with no posts or footings, so they can be installed on uneven surfaces. A floating deck requires careful planning and design to ensure it is properly anchored to prevent movement and damage.
Building a floating deck does involve some extra work and expenses, but it is an option for those who don’t have level ground for installing a traditional deck.
Build a floating deck in three steps:
1) Check Local Building Codes
2) Lay Out the Deck
3) Install the Deck
The first thing to consider when building a floating deck is the ground beneath it. If it’s level and has good drainage, you’re off to a good start. But if you live in an area with clay, or your yard is on a hill, you’ll need to make some adjustments.
Before you begin building your floating deck, find out how much weight it can support. If your deck will be supporting people, estimate how much weight will be on it at any given time, and multiply by two. This will give you an idea of how much material you’ll need for the project.
You should also consider whether there are any obstacles under the surface of your yard that could cause problems down the road — like pipes or roots.
If there are obstacles below ground level (like pipes or roots), they can be removed using a core drill machine or jackhammer before construction begins. Jackhammers are noisy and messy, so they should be used during off hours when neighbors aren’t around.
Building a floating deck is not hard, but there are some things you need to know beforehand. Here are the steps you need to take.
1. Check local building codes
2. Choose a deck type
3. Plan your layout
4. Lay out the frame
5. Install joists and stringers
6. Add flooring
7. Install railings
How to Build a Floating Deck Over Grass
Building a floating deck over grass is an inexpensive way to add extra space to your home without tearing up the yard. A floating deck is basically just a slab of concrete poured over top of the existing lawn. This method works best for decks that are less than 50 square feet in size, as it is difficult to get larger slabs to stay level on uneven ground.
Step 1: Remove Grass
Before you begin building your new deck, you must first remove all of the grass from underneath where it will be installed. If there are large patches of grass that cannot be removed by hand, simply use a weed eater or lawn mower to cut them down as close as possible to the ground. Any root systems that remain should be treated with Roundup or other weed killer before the concrete layer is poured.
Step 2: Prepare Ground
If you have soft soil or clay under your lawn, it will need to be compacted before any concrete can be placed on top of it. Drive wooden stakes into the ground wherever you intend placing posts or beams beneath your deck (if using support posts), then run heavy-duty cable between them at least one foot above grade level around all four sides of the proposed deck site (including corners). Att
Building a floating deck over grass is not as hard as it may sound. It requires some planning and design, but once you’ve completed the project, you’ll have a beautiful new deck with no unsightly posts or footings.
Step 1: Measure Your Deck
Determine how large your deck will be by measuring the area where you want to build it. You can use stakes and string to get an accurate measurement.
Step 2: Design Your Deck
Plan out the design of your deck by drawing on paper what you want it to look like. Consider whether you’d like a simple square or rectangular shape, or perhaps a more elaborate design with curves, angles and other features. If you’re unsure about what looks good together, look for examples in magazines or books that show different types of decks to help get ideas for your own design.
Step 3: Lay Out Your Rafters
Once you have decided on a basic design for your deck, lay out where each rafter will go using stakes and string as guides. Make sure all of your measurements are accurate so that everything fits together properly when complete.
Floating decks are a great choice if you want to add extra living space to your home without the expense of digging into the ground. The process is similar to building a deck on concrete.
Floating decks require some additional preparation, but you can still build a floating deck over grass in just a few days. Here’s how:
1) Determine where your deck will go. You may have to remove existing plants or even level the ground if it’s uneven. Make sure any underground utilities are buried at least 12 inches below grade (so they won’t be damaged by foot traffic). Also check your local ordinances for any restrictions related to building on top of lawns.
2) Lay out and mark where all of your posts will go — these should be spaced at least 2 feet apart and evenly distributed across the width of your deck area. Use stakes and string lines to mark out your lines, then dig holes for each post at least 12 inches deep (or deeper if there is unstable soil).
3) Place pressure-treated 4x4s (at least 8 feet long) into each hole and make sure they line up with one another so that your deck won’t rock back and forth when people walk on it (adjust
Floating decks are a great way to add some extra space to your home, and they’re also a really nice way to give your yard a unique look. But before you start building one, there are a few things you need to know about floating decks and the ground underneath them.
Floating decks can be built over uneven ground, but there are some things you need to know about how they will perform under different conditions. If you’re planning on using your floating deck as an outdoor living space, then it’s important that you take these factors into consideration before starting construction.
Floating decks work by resting on top of an area that has been filled in with concrete — this is what makes them “float” above the ground. The concrete pad acts as an anchor point for the deck, so that it doesn’t shift or sink under its own weight. The bridge part of the deck is built directly over top of this concrete pad, so that it can’t shift or move underneath itself while people are walking across it.
What kind of concrete pad should I use?
If you have uneven ground, or even just a slight slope, it can be difficult to build a solid deck. A floating deck is the answer.
A floating deck is built on top of the ground and not attached to it. The deck boards are built up off the ground and attached to posts that go into the ground at an angle. This way, the boards don’t sit directly on top of the grass and soil.
The process for building a floating deck is similar to building a regular deck with one big difference: You build the frame first, then install the railing before attaching the floorboards.