Building a deck frame on posts is much cheaper than building it up from the ground and can offer you a little more room to work with.
The most common way to build a deck frame is from the ground. You use one 4×4″ post in the middle of the kitchen to lock each frame together. This allows for a much faster build.
How to build a deck frame
Building a deck frame on the ground is an easy way to get started. You’ll need to build the frame for your deck first and then attach it to your house.
Building a deck frame on posts is more difficult than building one on the ground, but it offers more flexibility in design and construction.
If you want to build a deck with posts, you have several options:
You can build your own posts using pressure-treated lumber or composite materials. The post sizes are determined by the size of the deck and how many people will use it. For example, if you’re building a 12-foot square deck with 3-foot sides that will carry 200 pounds, each post should be 4x4x10 feet tall (or 4x6x9 feet tall for wood) and spaced 6 feet apart. You’ll also need 1x4x8 foot joists on 16-inch centers between each post.
You can buy prefabricated posts from home centers or specialty stores such as Lowes or Home Depot; these come in different sizes and lengths, depending on where they’re going to be placed in relation to the house (they’re usually notched for attachment). The tops of these posts should be about
The first step in building a deck is to determine how you want it to look. The size of your home and the space that’s available will help you determine the size of your deck. If you plan on having large gatherings, a large deck may be needed. However, if you are just looking for something to enjoy with friends and family, then a smaller deck would be sufficient.
Build Your Deck Frame On The Ground
The easiest way to build a deck frame is on the ground. This method saves time and money because there is no need to construct posts or build uprights. However, it does require more skill as well as more materials than other methods do. It also takes longer to complete because it requires more measurements and calculations than other methods do.
Building Your Deck Frame On Posts
If you decide that you want to build a deck from scratch instead of using pre-made plans then this method might be best for you. Building decks off posts can make them more sturdy and last longer since they are supported by concrete instead of only being connected by nails or screws into wood like most walls are built on today. If done correctly this method can result in an extremely stable structure that will withstand high winds without any problems at all!
Building a deck frame on the ground is one of the easiest ways to build a deck. The only tools you need are a tape measure, square and hammer.
Building a deck frame on posts is another option, which requires more specialized tools, but it allows you to build taller decks with more support.
Step 1: Mark out the center of your deck’s location. Measure down from the top of each wall and make an X with your chalk line. The vertical line should be the same length as your post spacing.
Step 2: Dig holes for each post according to its depth requirement and backfill with gravel or sand so that it’s level with the ground surface.
Step 3: Place concrete footings in each hole, making sure they’re level side-to-side and front-to-back with your level. Pour concrete around them until it reaches just below grade level (ground surface).
Step 4: Add pressure-treated lumber (PT) joists to each side of the post using joist hangers if you’re building on posts or framing directly onto concrete footings if you’re building on the ground. The joist hanger hooks over the top of your beam or joist and is held in place by screws driven into predrilled
If you already know how to build a deck frame, you will want to check out our guide on building a deck from scratch.
Building a deck frame on the ground is a common practice, as it is easier and cheaper than building it off of posts.
The most important thing when framing your deck is ensuring that you have the right materials and tools for the job. Here are some things that you will need:
Deck Framing Materials
Deck Framing Tools
The most common method of building a deck frame is to use posts that are set into the ground. This method can be used for decks up to about 10 feet tall, though taller decks may require some additional bracing.
The first step is to decide where you want your posts placed. Then dig holes for them that are deep enough to allow for the post’s length and the thickness of the concrete footing. For example, a 4×4 post buried 3 feet into the ground will need a hole that’s 4 feet deep.
Once you have dug your holes, place your 4×4 posts in them and secure them with concrete. If you’re using pressure-treated wood, be sure to check with local codes about whether or not it needs to be treated again after installation. You’ll also need to use metal connectors like joist hangers or clips to ensure that each joist runs parallel with an adjacent one so that it doesn’t sag or crack later on due to movement in your deck frames
Building a deck frame on posts is a great way to create a strong base for your deck. You can use this method to build a simple 8×8 deck, or larger decks with extensions that span over doorways and other large openings.
Building a deck frame on posts is often the best way to go when there are not enough flat surfaces available for building a deck. Unlike other methods, it allows you to build the structure above ground level, which can be very helpful if there isn’t any space below ground level.
If you have enough room, another option is to build your deck on top of an existing surface like the ground or concrete patio. This method requires you to dig out a shallow trench and fill it with gravel before setting up the support posts in the trench. The gravel helps prevent the posts from sinking into the soil
There are many different ways to build a deck frame on posts. The key is determining how much room you have available and how much support you need from each post.
How to Build a Deck Frame on Posts
Building a deck frame on posts is a simple and cost effective way to build a deck. The process is very similar to building a wall, except that you will be using the post caps for support instead of the concrete blocks. Although this method is simple, you still need to follow proper safety precautions and make sure that your measurements are accurate.
Using your measuring tape and level, mark each of your posts at 16 inches from the bottom. This measurement will vary slightly depending on the size of your deck, but it’s important that all of your posts are marked at the same height so that they are level with one another. If you are building a larger deck or want to add support beams in between posts, mark those spots as well so that they line up with each other when you start adding beams later on.
In this article, we will talk about how to build a deck frame on posts. Deck building is a great way to expand your home and increase the usable area of your property. If you are planning on building a deck or have already started, it is important to know how to build a deck frame on posts. This is especially true if you are using treated lumber for your deck because it will help prevent rot and decay from ruining your new structure. Before we get started with how to build a deck frame on posts, let’s take a look at the different types of posts for decks:
Wood Posts: Wood posts are typically made from pressure treated pine or cedar lumber. They are available in lengths ranging from 8′ – 10′ long and come with either 6″ x 6″ or 8″ x 8″ dimensions. These types of post have been used for decades as they are relatively inexpensive compared to other options while still providing adequate support for most residential applications. Pressure treated wood will last up to 20 years before needing replacement depending on its location (i.e., exposed vs protected from elements).
Fiberglass/Polymer Posts: Fiberglass or polymer posts offer many advantages over traditional wood posts such as low maintenance costs (no painting required) and
Before you start building your deck frame, take a look at the plans that you have purchased. This will give you an idea of the size of your deck and the materials needed to build it. If you are not sure about what size to build, use the following formula to calculate the size of your deck:
Length x Width = Square Feet
For example, if you want a 10′ x 10′ deck, then 10 x 10 = 100 sq. ft. Your square footage should be within 10% of this number. For example, if your square footage is 90 sq. ft., then the actual size would be 90 + 9 = 99 sq. ft. This gives room for error and other factors such as weather conditions, wind speed, etc., which may affect how much of an area is actually covered by your canopy.
Once you have figured out how large or small you want your deck to be, it’s time to start building!
Step 1: Measure and mark off where all beams will be placed on each corner post with chalk or spray paint (preferably both). You should also mark off where any posts will be placed between beams if they exist in your plan
The deck frame is the foundation for your deck. The frame consists of posts, beams and joists. The posts are the vertical supports that hold up the deck. The beams are horizontal pieces that connect to the posts, and they support the joists. Joists are wooden boards attached to the beams that give you a place to walk on your deck.
1 Choose where you want your deck to be, then mark off its dimensions with stakes or a string line. Dig holes for the posts at least 1 foot deep and 6 inches in diameter, using a post-hole digger or power auger.
2 Place a post cap on each end of each post, then turn it so it’s upright over its hole. Use an adjustable wrench and ratchet wrench to tighten down all four bolts on each cap securely.
3 Measure from inside corner of one post cap to inside corner of another post cap (this should be at least 4 feet), then cut two 2x4s this length with a saw and sandpaper them smooth if necessary (you could also use treated wood). Attach these boards vertically between your two posts with nails or screws every 6 inches along each board’s length (this will be both sides). These are called ledger boards because they are