One of the best things about living in the US is being able to enjoy a nice grilled meal. However, creating that perfect grilled meal can be extremely difficult. My wife loves grills and loves our 55 gallon drum smoker. It’s just me in this household and it takes more than two hands to grill something! Thankfully, we found a solution to my problem — a smoker. It was a little tough finding the right one but I’m glad I did after doing some research online.
When building a 55 gallon drum smoker, you have to tread lightly when it comes to cutting holes. If the holes are made incorrectly, there can be consequences. Although you’re working with metal and not glass, it’s always best to think of your drum smoker like a greenhouse: if you don’t seal off the smoker properly, then you could get things that aren’t so savory coming through. Sure, at that point it will be too late – but better to think ahead and do your best now than try and save a few bucks in the long run! Here are some tips and pointers to help you create the ultimate smoker
How to build a 55 gallon drum smoker
The 55 gallon drum smoker is a pretty popular DIY project. It’s cheap, easy to build and works really well.
Here are some plans for your consideration.
1. Double 55 Gallon Drum Smoker Plans
2. Horizontal 55 Gallon Drum Smoker Plans
3. 275 Gallon Oil Drum Smoker Plans
Double 55 Gallon Drum Smoker
The double 55 gallon drum smoker is a great way to build a smoker. The smoker consists of two 55 gallon drums. This smoker can be used for smoking food and also for heating purposes. It is possible to use this smoker as an outdoor oven or as a heater during the cold winter months. The double 55 gallon drum smoker is easy to make and does not require any special skills or tools.
The first step in making this smoker is to cut each drum in half with a sawzall or other power saw. Make sure that you wear safety goggles when cutting the drums, as they will have sharp edges when cut. Next, drill holes into each drum using an electric drill with a 3/8 inch bit. You should place one hole every three inches around all sides of the drum except for the bottom side. These holes will allow smoke from your fire to enter the inside of the drum, where it will come in contact with your meat or other food items being smoked.
Next, place your two drums together so that they are facing opposite directions and secure them using bolts and nuts through each hole that you drilled earlier in each drum (you should have two bolts per hole). A good way to do this is by attaching
I have a friend that wants to build a smoker from two 55 gallon drums. I have been looking for plans and have not found any. Does anyone know where I can find some? I tried google, but all the links have expired or are no longer active.
I have found several good plans, but they are all horizontal smokers. He wants it vertical so he can put it in his yard next to his grill and not take up much space.
The 55 gallon drum smoker is a popular backyard smoker for the homesteader and prepper. The 55 gallon drum smoker is made from two 55 gallon steel drums, one inside the other. The inner drum has holes drilled in it to allow smoke to pass through.
Determine the size of your smoke box. Buy the right size steel drum. The inner drum should have enough room for your meat and wood chips without being too large to lift or move around easily.
Drill holes in your inner drum: Determine where you want to place your holes and drill them using a drill bit that matches the size of your pipe cleaner. You will need 1/8″ holes for a 12″ pipe cleaner, which is what most people use, but some prefer 16″ pipe cleaners instead. Cut off any excess metal with a hacksaw after you’ve drilled all of your holes out (this will keep sparks from burning into your hand).
Build a fire box for your 55 gallon drum smoker: Build a firebox out of bricks or stones or whatever materials are available at home (a stone fireplace would work great). Put some charcoal briquettes on top of these, then light them with an electric starter or newspaper
A 55-gallon drum smoker is a great project for the backyard barbecue enthusiast. It’s simple to build, inexpensive and it gets the job done.
The first step is to gather all of your materials. For this project, you will need:
– A 55-gallon drum (either steel or plastic)
– Two 5/8 x 6 inch carriage bolts with nuts and washers (12 total)
– One 3/4 x 6 inch carriage bolt with nut and washer (8 total)
– Two 3/4 inch wood screws (16 total)
– A drill with a 1/2 inch spade bit and 1/2 inch drill bits
The 275 gallon oil drum smoker plans is a double 55 gallon drum smoker. This means that you will need two 55 gallon drums to make this project. The 275 gallon oil drum smoker plans are very easy to follow and can be completed in one weekend by most people.
If you want to make your own 275 gallon oil drum smoker plans, then you can download the full set of instructions from the link below. There are also plenty of pictures that show exactly how to build your own 275 gallon oil drum smoker plans.
The 275 gallon oil drum smoker is built using two 55 gallon drums and an old grill grate. You can also use a piece of steel mesh if you don’t have an old grill grate laying around. After you have built your 275 gallon oil drum smoker, then you will need to seal it with some type of epoxy or cement before cooking on it.
The 275 gallon oil drum smoker is a great way to save money while still having a great product in your backyard!
275 Gallon Oil Drum Smoker Plans
The 275 gallon oil drum smoker plans that I am sharing with you today are very easy to follow and will help you build your own smoker. I have seen a lot of smokers made from barrels before, but none as well designed as this one. This smoker is not just for cooking meat though, it can also be used for smoking fish or even vegetables if you want to make some delicious smoked vegetables for dinner tonight.
You can cook anything in this smoker that you would normally cook on a grill or in an oven. The only difference is that it will take longer because there is no direct heat being applied to the food like there would be in an oven or on a grill. If you are looking for something different than the traditional barbecue, then this could be just what you are looking for!
This is a 275 gallon oil drum smoker. It is made from 2 drums. The top drum is cut open at the top, and has holes drilled into it for air flow control. You can make it as tight or as loose as you want. The bottom drum has a hole cut out of it at the bottom to allow smoke to escape through the bottom of your smoker. There are also some holes drilled in this drum to allow grease and fat to drip down into the fire pit below, which keeps your fire burning longer, and helps keep your meat moist while smoking. This also helps you clean up when you are done with your cook!
You will need 1 hot plate/grill/BBQ grill (whatever you prefer), 2 55 gallon steel drums with lids (or 3 if you plan on cooking larger cuts of meat), drill press (optional), sawzall or other power saw, drill bits (various sizes), 1″x3″ wooden dowel rods (12″) long, wire brush or sandpaper, 1 galvanized trash can lid (18″), charcoal chimney or other means of starting your fire (optional), charcoal briquets, lighter fluid or other accelerant for lighting your
These plans are for a 275 gallon oil drum smoker that I built. It’s basically a horizontal barrel smoker with a firebox underneath. I use this smoker for cooking briskets, pork butts and other large cuts of meat.
The 275 gallon drum is about 8″ x 14″ and 33″ tall, which makes it much taller than the 30 gallon barrels that most people use for smokers. This means that the firebox is located below the meat rather than above it like the other designs I’ve seen on the web.
I’ve cooked many briskets in this smoker and they’ve all turned out great! The secret is to use lots of wood chips or chunks and let them smolder slowly in your firebox until they turn into coals. Then you can transfer those coals into your barrel to finish cooking your food (which takes about 3-4 hours).
I’ve been wanting to build my own vertical smoker for some time now. I was going to do a horizontal one but then I came across the idea of using an old 275 gallon steel drum as a base. The steel drums are readily available in my area and they’re free if you pick them up yourself. The only cost is the paint and primer needed to prepare them for use as a smoker. It’s also much easier than trying to find a used propane tank for horizontal smokers (which are also free).
The first step is cleaning out all of the paint from inside your barrel. This can take some time because there are many layers of paint on most barrels. Most of it will come off with a wire brush attached to an electric drill but there may be some areas that require scraping with a putty knife or even sanding by hand. If you still have access holes where valves were installed, those are good places to start since they’re usually easier to get into than some other spots on the barrel.
This is a 275 gallon oil drum smoker plans. This is a horizontal smoker that uses two 55 gallon drums.
The 275 gallon oil drum smoker plans are designed to be used with two 55 gallon drums, but they could also be modified to use one drum and some extra support.
The 275 gallon oil drum smoker plans are pretty simple, but it does take some time to put together. The total cost of this project was around $100, including the wood chips and charcoal.
This 275 gallon oil drum smoker plans is designed for cooking for a crowd of about 20 people at once. It can also be used for smoking smaller amounts of food or even by just one person if you don’t need to make as much food at once.
I have had a lot of people ask me about building a 275 gallon oil drum smoker so I decided to put together some plans for you. The design is based on the horizontal smoker in my book but with a twist. It has an attached firebox and the cooking chamber sits on top of the firebox. This makes it easier to light, keeps your meat above the heat source and makes it easier to clean up.
A 275 gallon drum smoker is big enough for most anything you can think of smoking, including whole hogs and cows! A 275 gallon oil drum will hold about 10-20 chickens or 10-20 slabs of ribs at once.
The 275 Gallon Drum Smoker Plans include:
1) Complete Parts List-Includes all the hardware needed to build your 275 gallon drum smoker from scratch (including step by step instructions).
275 Gallon Oil Drum Smoker Plans
The 275 gallon oil drum smoker plans are a horizontal smoker, which means you will be able to smoke large cuts of meat and larger pieces of fish. This smoker is also ideal for making jerky and other dehydrated foods. The 275 gallon drum smoker has three legs on each side for support and stability, and you can use the bottom of the drum as a drip pan.
If you have any questions or comments about this 275 gallon oil drum smoker plans, please leave them below!
275 Gallon Oil Drum Smoker Plans Specifications:
Materials Needed:
-1x 275 Gallon Steel Drum (55 Gallon Drums work too)
-5/8″ x 1/4″ Flat Bar 16″ long (or 2x 1/4″ x 3/4″ Flat Bar 16″ long)**See Notes Below**
275 gallon oil drum smoker plans
The 275 gallon drum smoker is my personal favorite. It can be built in an afternoon and only costs about $100 in materials. The 275 gallon drum smoker has a 20 square foot cooking surface and 2 racks that can be stacked so you get 40 square feet of cooking space.
The 275 gallon drum smoker is designed to hold a 55 gallon steel drum on its side, so it is ideal for those who want to build something larger than the standard barrel smokers but don’t have the space or budget for a 300+ pound monster smoker.
The 275 gallon drum smoker is built with 3/8 inch steel plate for strength, durability and longevity. It will last for years without any maintenance or refinishing! The 275 gallon barrel smoker has been tested by hundreds of people all over the world with great success.