Golfers love to dress up for their rounds of golf. You can see them with their polos, ties and even wear a cap at times. There is also something interesting these golfers have and that is 3 hole washer board game. Many use it as recreation to chill out during the round or in between the tour during break time. What do you think? Do you want to set up the same kind of recreation for your workplace?
A 3-hole washer board is a massive version of the traditional 1 hole washer board, played on a similar surface. Also known as “plinko” or “giggity” or other such nonsense names (at least, until I made them up), the 3-hole washers board is a fun pastime that costs pennies to do and can be enjoyed by every member of the family. With a few modifications it can also be made into an entertaining game for parties or other social gatherings.
How to build a 3 hole washer board
3 hole washer boards are the most common style of washers game. They are used in bars, game rooms and many other places.
The standard size of a 3 hole washer board is 14” x 14” but they can be customized to any size. The 3 hole board has 3 holes drilled in one side and they are numbered 1-8 or 1-10, depending on the number of players playing.
You can customize your own design on the front of your board, or choose from some of our pre-made designs.
Each player gets three steel washers that have different weights based on the number in each set:
Sets of 8 have 2 light (1 lb), 2 medium (2 lbs), and 2 heavy (3 lbs)
Sets of 10 have 2 light (1 lb), 4 medium (2 lbs), 4 heavy (3 lbs)
The washer board is a game that can be played by two people or more. Each player has a set of three metal washers that they must use to knock out other players’ washers from the board. The first person who knocks out all of their opponents’ washers wins.
The size of the board varies depending on where you purchase it, but most boards are about 1 foot wide and 4 feet long. The holes should be spaced apart about an inch or so apart, which allows for a good amount of space for your fingers to grip into when knocking out your opponent’s washers.
When buying a washer board, make sure that it has some sort of protective covering over the metal surface so that it doesn’t scratch up too easily during play. You may also want to look for one with raised edges around the outside to help prevent those annoying “bounce-backs” when knocking out someone else’s washers!
Depending on the type of game you want to play, there are several different rules and regulations that go along with each one:
1) Mexican Washers – This type of game is played with two teams (usually two players per team), and each team has three members who stand behind their respective
3 hole washer board is a game that is played by many people. It is a simple game that requires three holes cut into a block of wood, which are used as targets for the washers.
The 3 hole washer board game can be played with three different types of rules. The first type of rule requires each player to throw three washers per turn, and the closest one to the center wins. The second type of rule requires each player to throw six washers per turn, and whoever gets the most points wins.
The third type of rule requires each player to throw three washers per turn, but only one point is awarded for each hole that they sink their washer in. If a player sinks all three of their washers in one turn, they will receive an extra point added onto their score at the end of the round.
The washer board is a game that has been played for many years and is still popular today. It is a fun game that can be played by anyone, young and old alike. The game consists of throwing washers at a board with holes in it, trying to get them into the holes. The more holes you get in, the more points you win and the better your score.
The washer board can be made from wood or metal, depending on what materials you have available at home. If you prefer wood then you will need some 2″ x 4″s which are cut into 18″ pieces and nailed together to form two boards which are 6′ long each. These two boards will then be nailed together at a 90 degree angle so that they make an L shape when stood up on their ends. If you prefer metal then buy two lengths of steel tubing which are 18″ long each and attach them together with bolts so that they make an L shape also. Once this has been done drill three holes into each board between 3/8″ and 1/2″ deep and then paint both sides with primer paint or cover them with duct tape so that they don’t rust easily when exposed to water.
A washer board is a game where you try to throw a washer onto a board with holes. It’s a great backyard game for kids of all ages and it’s also fun for adults.
The equipment needed to build your own washer board is simple:
A sheet of plywood or hardboard, cut into the shape of your choice. You can get creative with this part. I like using old pallet wood because it has character, but any kind of wood will work fine.
Some 2″ screws to attach your plywood shape to a base for stability (optional)
A piece of wood that has been cut into three equal sections and nailed together in the middle (also called “three-hole washers”). This is where the washers will go through so that they don’t fall off when you step on them during play!
Washers that have been drilled through one side (they’ll be attached to each other later). Get ones that are heavy enough not to move around while playing!
Washers is a skill game that is played with a small disc called a washer. Washers are usually made of metal or plastic, although wooden ones can be found in some places. The object of the game is to toss the washer onto a board and get it to fall through one of the holes.
If you are looking for a high quality washer board for sale, then you have come to the right place. We offer regulation-sized boards that are perfect for any type of play. We also sell 3 hole boards that have been designed specifically for children who want to learn how to play this fun game!
If you have never played this game before, then let me tell you what it’s all about!
We offer a complete line of regulation size (13″ diameter) washers, including 3 hole boards, 4 hole boards and 5 hole boards. We also have an extensive selection of novelty size washers.
The best thing about these washer boards is that they are regulation size, which means they will fit in any standard washers game set up. You can also use them for your own personal enjoyment at home or in the office.
We offer our washers in a wide range of colors, so you’re sure to find one that matches your decor. Our competitive pricing makes it easy to outfit your entire office or event with these fun playing pieces!
We offer the best selection of washer boards for sale, including regulation washer boards. All of our products are made from high-quality materials to ensure durability and longevity.
Our selection includes 3 hole washer boards for sale, 4 hole washer boards for sale, 5 hole washer boards for sale, 6 hole washer boards for sale, 7 hole washer boards for sale and 8 hole washer boards for sale.
Each board is designed to meet the needs of any player’s skill level or preference. They can be used indoors or outdoors and will last through years of use!
Regulation washer boards are used in the game of “mexican washers”. The board is made up of six holes in a diamond pattern, with the center hole being larger than the other five. The object of the game is to throw your washer through one of the holes.
Each player throws three times, and the player with the most points wins. The scoring is as follows:
Hole in which your washer lands – 1 point
Center hole – 3 points
If you throw it through a hole and it falls back out – 2 points
Washers is a game that can be played with as few as three or as many as thirty-six players. The objective of the game is to get rid of all your washers by shooting them into the holes in the board.
A typical game of washers is played on a wooden board with six to twelve 1″ diameter holes drilled into it. The board is divided into two sides: one side has six holes and the other has five, seven, or eight holes. A set of washers, usually numbering two per player, are placed on a line between two of the holes in front of each player.
Each player gets one turn at throwing their washer at the board and removing a certain number of washers from play (number depends on how many players are playing). If you knock over any other washer on your turn then you must put one back in its place before you throw again. You must also put a new washer in its place if you knock over your own when trying to take other ones out and don’t have any left to replace it with (don’t have any more available).