Most government agencies do not release exact cost figures for road building. Usually, they just issue approximate figures or information based on the estimated cost per linear foot of road built. This can be very misleading.
True cost to build a mile of road is $7,526,973.04 when using WIMA (Woods Roads in Miles Account). It is defined as…”Woods roads in miles account takes into account the amount of man hours required to build a mile of road with timber and other forest products.”
How much does it cost to build a mile of road
The cost of building a mile of road varies greatly depending on the type of road, the location and other factors.
Road construction costs per km africa
The average cost to build a mile of road is $1 million. This includes asphalt or concrete pavement, curbs, gutters and sidewalks — everything needed to turn a raw piece of land into a usable road.
Asphalt road cost per mile
The cost to build a mile of asphalt road varies by region but averages $3 million. It’s more expensive in urban areas because it usually involves digging up existing roads to lay new pipes and wires for utility companies. The price also depends on whether you’re building new asphalt or repairing existing asphalt. The latter can be as low as $2 million per mile but still requires some excavation work that inflates the price tag.
Road construction costs per kilometer africa
Raw materials account for about half the cost of building a kilometer of road in Africa, according to data from the World Bank and other sources compiled by Global Construction Review. Materials include crushed stone aggregate base material, asphalt or concrete pavement and drainage pipes for stormwater runoff
The cost to build a mile of road varies by location, type of road, and materials used.
Road construction cost per km in usa
The cost to build a mile of road varies by location, type of road, and materials used. The following is a list of average costs for various types of roads.
Asphalt concrete pavement: $1 million per mile (1.6 kilometers)
Concrete pavement: $2 million per mile (3 kilometers)
Tarmac concrete pavement: $2 million per mile (3 kilometers)
The cost of building a mile of road varies by the type of road, location and design. For example, a four-lane highway in rural North Dakota costs about $25 million per mile to build, while a two-lane state highway in rural Texas costs about $3 million per mile. The cost also depends on whether the road is being built with new materials or using existing infrastructure.
Road construction costs can vary significantly depending on location, as well as the type of project and its complexity. The following sections provide an overview of asphalt road cost per mile estimates for various locations in the United States and abroad.
Asphalt Road Cost Per Mile Estimates
The average asphalt road cost per mile varies widely across different states within the U.S., ranging from $7 million to $20 million per mile. The following table lists the average asphalt road cost per mile by state:
The cost to build a mile of road varies depending on the type of roadway, location and terrain. Asphalt roads cost less to construct than concrete roads because they’re cheaper and easier to install.
Road construction costs per mile vary considerably depending on the type of roadway being built and the region where it’s being constructed. For example, asphalt roads tend to be less expensive to build in rural areas than concrete ones because they’re less durable and require more maintenance over time.
The average cost to build a mile of road is $3 million (asphalt) or $5 million (concrete). The following factors can increase these numbers by 50%:
Highway construction: $6 million per mile (asphalt) or $9 million (concrete)
Urban street construction: $7 million per mile (asphalt) or $10 million (concrete)
The average cost to build a mile of road in the United States is $7.4 million per mile. This figure includes building the road’s foundation, drainage systems, ramps and bridges. It does not include the cost of purchasing land or property rights.
The cost to build one mile of highway in North Dakota is $15 million per mile, while it costs $21 million per mile to build a mile of highway in New Jersey.
The cost to build one mile of four-lane highway in Louisiana is $8 million per mile, while it costs $10 million per mile to build a two-lane state highway in Connecticut.
It takes approximately three months to construct one mile of paved road on flat terrain with good weather conditions, according to an estimate by the Federal Highway Administration (FHA).
Asphalt road cost per mile
Asphalt concrete (AC) road construction cost per mile is $1.5 to $2.0 million per mile. The average asphalt concrete pavement has a thickness of about 2 inches, but some can be as thick as 8 inches. This type of pavement has a life of 15 to 20 years, depending on the climate and traffic conditions.
The cost depends on many factors including the type of asphalt used and its quality, the length of the road, the complexity of its design, any bridges or tunnels needed along the way, and any necessary drainage systems or subgrade preparation work.
Concrete slab-on-grade roads cost between $3 million and $10 million per mile depending on the size and complexity of each project. Slab-on-grade roads are typically built with concrete slabs called “superpave” that are reinforced with steel mesh and layers of cement to create a dense surface that resists cracking from temperature changes or other forces that can cause damage over time
The cost of building a road varies greatly depending on the type of road, its length, the area in which it is built and who is doing the work. The cost of building a short stretch of rural road may be as low as $1 million per kilometre, while a highway in an urban area could cost over $200 million per kilometre to build
The cost of asphalt is based on several factors including the size of your project and how much asphalt you need. Asphalt prices vary from state to state so you will want to know what your local price is before you begin a project. Asphalt prices also vary at different times during the year. For example, asphalt is usually cheaper during the summer months when there is less demand for it because people tend not to drive as much then. However, asphalt prices are usually higher during the winter months because people need their roads cleared so they can get around safely.
Road construction cost per km in the United States is about $4 million per kilometer. This includes the costs for planning, legal issues, surveying and land acquisition. The cost of road construction can be as low as $1 million/km if the road is being built on an existing right-of-way.
Road construction cost calculator
The following factors will help you calculate the overall cost of asphalt road construction:
Total Length of Road – The total length of the road is multiplied with unit price to get total estimated cost.
Width (in feet) – Width of the road is multiplied with unit price to get total estimated cost.
Surface Type – The surface type (asphalt or concrete) affects the cost of road construction. Asphalt roads are cheaper than concrete ones and are often used for residential streets, but concrete roads are more durable and last longer than asphalt ones.
The cost of road construction per kilometer is not the only factor to be considered when making decisions about how to build a road. The design and construction of the road itself are also important considerations.
The cost of asphalt for roads varies depending on where you live and the type of asphalt you need. Asphalt is commonly used in road construction because it is less expensive than concrete, but is just as strong and durable. The price of asphalt varies from state to state, but generally costs between $30 and $70 per ton when purchased in bulk quantities. This means that if you have 1,000 square feet of asphalt to cover, it would cost $30-70 per ton. In addition to asphalt being less expensive than concrete, it also requires less maintenance over time since it has less moisture in it than concrete does.
The construction of roads is a complex process that requires a lot of planning, skill and experience. The construction of roads involves the laying of concrete or asphalt layers on the surface of the road.
There are different types of road construction techniques used in constructing roads. These techniques include:
Lightweight materials (tarmac)
Heavyweight materials (concrete).