A platform deck is simple and affordable compared to a porch, deck or gazebo. It is easy to build with basic carpentry tools, but requires more planning than an above-ground deck. The two most common platform deck designs are flush ground level and slightly elevated.
Are you planning to build a deck? Do you want it to last for a lifetime and be easy to maintain? Following these tips will help you build a platform deck by saving money and effort. Let’s begin!
How to build a small platform deck
A platform deck is a low, flat deck that raises the height of the ground level. In other words, it’s like adding a porch to your home without actually having to build a structure above the ground. Platform decks are perfect for outdoor entertaining or simply as an outdoor living space. They’re easy to build and cost less than most other types of decks.
Platform decking can be built from any material, including wood, composite and PVC. The most common type of platform deck is made from pressure-treated pine and is about 4 inches high. This allows for some drainage under your deck so that standing water doesn’t pool on top of it when it rains or snows heavily.
The first step in building a platform deck is digging down into the ground where you want the platform to be located. Then you lay down gravel and compact it with a plate compactor (a machine with large steel wheels). Next, you install joist hangers at 16-inch intervals along the perimeter of your future deck so that they’ll fit over the beams later on. Then you place 2×6 boards on top of each joist hanger making sure that they’re level with each other across their entire length (no gaps!). This will form
A simple, low-maintenance deck can easily be built by a homeowner. You don’t need to be a skilled carpenter or have extensive experience to build a platform deck. If you’re willing to put in the time and effort, you can build a simple, attractive deck that will last for years.
A platform deck is typically built on top of blocks or posts set into the ground. This is called an elevated deck or raised deck. The blocks or posts support the weight of the deck so that it doesn’t sink into the ground when people walk on it. Platform decks are easy to build because they require less framing than other types of decks.
Platform decks are usually between 8 inches and 16 inches above grade (the ground level). This makes them ideal for areas where there’s not enough height to accommodate joists below the deck surface where people walk and sit. They’re also often used in areas with wet soil where a lower level might create drainage problems during heavy rains and snow melt.
Decks are a great way to expand living space and enjoy the outdoors. They can be built at ground level, or on top of existing structures such as patios and stoops. In this guide we’ll show you how to build a small platform deck for outdoor living.
Step 1: Choose your materials
The first step is choosing your materials. You’ll need 2x4s for framing, and 2x6s for joists. You will also need nails and screws, along with various other hardware like hinges and handles. The size of your deck will determine the amount of lumber you need, so take careful measurements before purchasing any materials.
Step 2: Lay out the deck frame
Once you have all your supplies together it’s time to start building! Start by laying out the deck frame on the ground where you want it to go (keep in mind that once complete it should be flush with the ground). Then start attaching 2×6 joists across each other to create a box shape (we recommend using joist hangers for this). The size of the box should be slightly larger than your measurements so that it fits snugly around them when complete (this is called overhanging).
Platform decks are great for creating more usable space. They’re also a good option if you want to build a deck that’s level with the ground.
Platform decks can be built on an existing concrete pad, or directly on dirt. If you’re building on dirt, make sure your soil is compacted and well-drained before you begin construction. You may need to add fill dirt as needed to create a level foundation.
If building on concrete, you’ll need to remove any old concrete or debris and sweep away any dirt or debris before starting the project. Use a hammer drill to bore holes into the concrete slab at each joist location so that you can secure the posts with concrete anchors when installing them later in the project.
Once all of your framing is complete, you can lay down pressure-treated plywood sheets across all joists after applying wood glue between each sheet and screwing them together tightly using 2″ screws every 6″ along each seam. The boards will form a base for your decking material and protect against moisture from below ground level.
How to build a platform deck
A platform deck is a great option for those wanting to maximize space in their backyard. It can be used as a patio or a walkway, and it’s very easy to build. You can use a variety of materials to build your platform deck, but cedar is one of the best because it is durable and looks great. Here are some tips for building your own platform deck:
Step 1 – Get your materials together
You will need the following:
Lumber (2 x 6s or 2 x 8s) – You can get scrap lumber from local lumberyards or home improvement stores. Scrap lumber may be rough sawn, which means that there may be knots in the wood and they won’t be perfectly straight, but this doesn’t matter too much since you’ll be covering them up with siding anyway. You will need enough lumber to cover the area where you want your deck (see Step 2). If you’re building an elevated deck, you’ll need enough lumber to reach from one end of the structure to the other (plus extra for support). For example, if you want to build a 10-foot wide elevated deck, you’ll need at least 20 feet of 2 x 6 or 2 x 8 lumber.
Step 1
The first step is to determine the location of your deck. If you have a backyard, then it’s time to consider the design and layout. The most common way to build a platform deck is by using pressure-treated wood. You can use treated pine or cedar for this type of wooden decking. You can also use composite materials like Trex or similar materials for your decking material.
Step 2
The next step is to draw up plans for your new platform deck. You will need these plans when you go shopping for materials because they will tell you how much lumber or other materials you will need to buy. It’s best to make sure that your plans are drawn up by someone who knows what they’re doing, like an architect or engineer, since this will ensure that everything gets done correctly and on time.
Step 3
Once you’ve got all of your plans drawn up and approved by a professional, it’s time to start building your platform deck! With pressure-treated lumber being one of the most popular choices among DIYers these days, it’s hard not finding what you need at any home improvement store near you! Most stores carry at least one type of
A deck is the perfect place to create an outdoor room with a great view. It can be used as a living room, dining room or even a bedroom. A deck is a structure that is built on top of another structure (i.e., the ground) and it provides an excellent space for entertaining and relaxing with family and friends.
Before you begin building your deck, it’s important to understand the basic parts of a deck so you can plan ahead and have everything ready when you start construction. Here are some tips for building a ground level deck:
Determine the size of your deck. Measure the length and width of the area where you want to build your deck. Then calculate how many square feet of space you have available for your deck design by multiplying length x width. For example, if your backyard has 20 feet of space available for a deck design, then 20 x 20 = 400 square feet (SF).
Choose a location for your new deck. Decks must be built on flat, level ground so they will remain sturdy throughout years of use. It’s also best if they are installed away from trees or other structures where they could be damaged in high winds or storms; this includes any foundations that may exist below
Building a deck can be a fun and rewarding project. It is also an investment that will increase the value of your home and provide years of enjoyment.
A platform deck is a deck that sits directly on top of the ground, with no support posts. They are often built over concrete slabs, but they can also be constructed on wooden platforms or decks. The key to building a platform deck is to construct it in such a way that it doesn’t sink into the ground when you walk on it.
The first step in building a platform deck is to build a frame around the perimeter of the deck. This frame should be made from 2x4s or 2x6s depending on how much weight you want to support. The frame should be tall enough so that people will not have to bend over too far when walking around it, but short enough so that it doesn’t obscure any views from inside your home.
Next, attach joist hangers onto each side of each joist using galvanized nails or screws (depending on what type of hanger you’re using). Then install 2x6s between each pair of joists, attaching them with galvanized nails or screws as well
How to Build a Deck
If you’re going to be building a deck, here are the steps you need to take:
Step 1 – Draw your deck plans. You need to know the size of your deck and where the joists will go. Use a deck designer software program or try this free online tool by Wood Design Software.
Step 2 – Decide how you want your decking material installed. You can install it vertically, horizontally or on an angle (called diagonally). Most decks are installed vertically because it’s easier to lay out boards this way, but if you prefer horizontal or diagonal patterns, there will be less waste in buying materials at a lumber yard or home improvement store.
Step 3 – Find out what kind of soil conditions exist where your deck will be built and how much drainage is available for any water that may accumulate there after heavy rains. If the soil is too wet or soft, then you may want to add gravel underneath so that water can drain away from under the deck. If drainage isn’t an issue in this area of your yard, then just leave things as they are so that they don’t get too muddy after rainstorms and other weather events throughout the year.
Many of us have dreamed about having a deck in our backyard. A deck can be a great place to entertain friends and family, but it can also be the perfect spot to relax with a good book or enjoy a cup of coffee in the morning.
If you are interested in building a deck at your home, you should know that there are many different types of decks that you can choose from. You can choose from traditional wood decks or composite decks. Composite decks are made from recycled plastic and wood fibers that are molded together. Wood decks are often made from cedar or redwood because these woods tend to last longer than other types of wood such as pine or spruce.
The first thing that you need to do when building a deck is measure out the area where you want your deck to be located. If you are building a smaller deck, then it may not take very long at all for you to complete this step in the process. However, if you are building an elaborate large-scale backyard patio area then this could take several days or even weeks before it is completed so make sure that you have enough time available before beginning this project so that it does not end up being rushed and done poorly because it was not