There are plenty of ways that you can build a deck over concrete slabs. It’s not always easy to do, but with a little know-how, it’s not terribly difficult either. By learning about how to build low decks above concrete slabs, you’ll be able to look for different options and find the best one for your needs.
Build your deck on sturdy, structurally sound concrete. Sound simple? It is not; the concrete under the deck is more than just a good foundation for the deck joists, it bears the weight of the whole deck.
How to build a deck on concrete slab
If you want to build a deck over concrete steps, there are several ways to approach the project. You can build a deck that is higher than the concrete stairs or create a low-rise deck that rests directly on top of the stairs. Both types of decks require careful planning and preparation.
Building a Deck Over Concrete Steps
If you want to build a deck over concrete steps, there are several ways to approach the project. You can build a deck that is higher than the concrete stairs or create a low-rise deck that rests directly on top of the stairs. Both types of decks require careful planning and preparation.
If you want to build your deck above your concrete steps, then you will need to install posts beneath each step and attach beams between them. The beams will function as joists for your new decking surface. You can use pressure-treated lumber for these joists because they will be buried in the ground (a few inches below grade). However, if you plan to paint your new decking surface, then it may make sense to use cedar or redwood instead of pressure treated lumber.
Once all of your supporting posts have been installed, attach them
One of the most common questions we get from customers is how to build a deck over concrete steps. This is a great question because it can be done in many different ways, depending on the style and design of your deck.
Here are some ideas for building a deck over concrete steps to help you decide which option will work best for your home.
The most traditional way to build a deck over concrete steps is with a ledger board that spans between two posts. These ledger boards are typically made from pressure-treated lumber and they provide support for the joists that run perpendicular to the stairs. The advantage of this style is that it’s easy to install, but there are some downsides too. One disadvantage is that if you want to expand or change your deck later on down the road, it can be difficult or impossible because of all of those posts! Another issue is that if you want more space at one end than another (like an extra ramp), then this type of construction won’t allow for that either.
To help solve these problems, here’s an alternative option:
Building a deck on top of a concrete slab is not as difficult as it might seem. In fact, it is possible to build a wooden deck over concrete steps or other flat surfaces using basic carpentry skills and common tools.
Building a deck over concrete involves building the deck frame directly on top of the concrete. However, if you want your deck to look like it’s floating above the ground, you need to build wooden support posts that go through the concrete and into the ground below it. Here’s how to build a deck over an existing concrete step:
Step 1: Marking and cutting wood boards
Before you can start building your deck, you need to cut several pieces of 2×6 lumber into smaller sections. Cut each piece so that one end is 7 inches longer than the other end (for example, cut one at 16 inches long and another at 27 inches long).
Marking out these pieces will help make sure that they fit together properly later on in this process.
Homeowners have many options when it comes to building a deck on their property. They may choose to use wood for the framing, or they might go with steel or aluminum. If you want to build a deck on concrete slab, however, you’ll need to find another option.
Building a deck on concrete is possible, but you will need some special equipment and materials. You’ll also need to do some planning before you start your project so that you can make sure that everything is built correctly and safely.
Concrete decks are usually very low (less than two feet above grade), so the first step in the process is designing your deck so that it meets all local building codes. It also needs to be built according to your local building code requirements for footing depths, bearing pressure and other issues related to building over concrete slabs.
Once these issues are taken care of, you can begin planning your deck’s design and construction.
Building a deck on concrete is a good way to save money, but it does have its limitations. Concrete slabs are flat, hard and cold. They don’t provide a comfortable place to sit, and they are often covered with gravel or grass that may be difficult to walk on in bare feet. But if you want to build a deck over concrete, here’s what you need to know:
1. Choose the right material for your decking boards. Wood is the most popular choice for decks because it’s easy to work with and looks good. Pressure-treated lumber gives you extra protection against rot and insect damage. You can also use cedar, redwood or composite materials like Trex or Fiberon if you want an even better look with fewer maintenance issues.
2. Make sure your measurements are accurate before you start building so that everything lines up correctly when you’re done. Use a framing square or carpenter’s level as a guide before cutting any boards with your circular saw or power miter saw (if using treated lumber).
3. If you’re building stairs out of treated lumber, cut 2x6s into 3-foot lengths and attach them together using lag screws (or other fasteners) at each step location so that they
you are looking for a low deck over concrete steps, you may be interested in this article by Fine Homebuilding magazine.
I have built a deck over my concrete steps, and it works great! It looks like a real deck, not just a landing. If you are handy with tools and have some basic carpentry skills, this project will be easy for you. If you don’t have any experience with carpentry or building decks, it is still possible to build this deck on your own but it might take longer than expected because there will be more trial and error involved.
The first thing to do is remove all of the old wood from your original deck and start fresh. You can either cut the old wood yourself or hire someone to do it for you. The next step is to put down any new wood materials needed (i.e., joists, boards). Once that is done, then start framing out all of the walls using 2x4s as well as installing all of the railings that go around the perimeter of your new deck. Once you have finished framing out all of those things, then install any stairs or ramps that are needed to access the new area (i
How to Build a Deck Over Concrete Steps
Building over concrete steps is a great way to add value to your home. By building over the concrete you can create additional storage space, a dining area or even an outdoor kitchen. The structure can be as simple or as complicated as you want it to be.
Step 1 – Planning
The first step in building a deck over concrete steps is to plan out what you want to build and how you are going to do it. You may have ideas of what you want but if they aren’t realistic then it will be best not too build them at all. The easiest way to lay out your plan is by drawing it out on paper or using computer software like Sketchup which allows you to create an accurate representation of what your plans will look like when finished.
Step 2 – Measurements
Once you have decided on what layout you want for your deck, measure the dimensions of each level so that you know how much material will be needed for each section. If there are multiple levels then make sure that each one measures up correctly before continuing with the design process so that nothing gets mixed up or cut incorrectly later on in the project. You can also use these measurements when ordering materials if they are not available locally or through local
This is a very low deck over concrete steps, and it’s going to be used as a potting bench. So it’s really just an area where we can put some plants, maybe store some tools and pots, but it’s also going to be a place where we can sit down and have lunch or something like that.
So the first thing we need to do is take out the decking material from our joists. We’re going to use this 4×4 post at the bottom of our stairs as our new support beam. So what we’re going to do is measure out from that point along the joist, mark it off and then cut our 2x6s accordingly. Then once all of those are cut out, we’re going to attach them to each other using these 3″ screws right here. And then once they’re all attached together, we’ll go ahead and screw them through these joists into this 4×4 post that we have down below. So now that those pieces are all connected together, what we need to do next is attach them directly onto these joists here so that they don’t move around while we’re installing everything else
Building a deck over concrete steps is possible, but it does require some care and planning. If you’re comfortable working with tools, it’s an easy project that will add value to your home.
If you’re not comfortable with the idea of DIY, hire a contractor to build the deck for you.
Materials needed to build a deck over concrete steps:
A level surface of pressure-treated lumber (3/4-inch thick) that is slightly longer than the width of your steps’ landing. For example, if your stairs are 8 feet wide, make your joists 10 feet long so they butt up against each other at the top and bottom of each step in order to provide complete support for your new deck.
One-by-six or one-by-eight lumber for joist headers, which are wood beams that span across all six or eight steps so that the joists can be nailed directly into them instead of into just two separate posts on either side of your landing area.
First, you need to remove the concrete. If the concrete is in good shape, it can be broken up with a sledgehammer or masonry hammer and removed by hand. You may have to use a jackhammer to break up larger areas.
If the concrete is badly deteriorated or damaged, you’ll probably want to hire a contractor to break it up for you. The removal process will vary based on the type of concrete and how much work needs to be done.
Once you’ve removed the old concrete, it’s time to install your new decking material and framing.
You’ll need framing for both sides of each step, as well as for the landing at either end of your stairs. You can use pressure-treated lumber if you want a wood deck, but dimensional lumber works just as well in most cases.